What do you guys think??

[125oh]

Gonna be hitting the track this spring what kind of times do you think ill be able to get with base 2014 auto? Mods are off road h , front sway delete , mike rousch tune, and 5c converter . only suspension is bmr springs and panhard bar . weld bigs and littles with hoosier d/r. Thanks in advance . O yea track DA will prob be around +1000

 

[scotmach]

Low to mid 11's easily I would say. Should be a fun car regardless with those mods.

 

[Rct851]

If tune and orh are the only power mods your at more or less 400rwhp. I'd guess high 11's

 

[kingcobra323]

11.4-11.6s

Posted via Topify on Android

 

[125oh]

11.5 would be great , might try and get the transbrake wired up also to help a little .

 

[scotmach]

If tune and orh are the only power mods your at more or less 400rwhp. I'd guess high 11's

Except he has a 5C converter so that's worth half a second minimum.

 

[DaBigBone]

Id say around 11.6

 

[kingcobra323]

If it's available mikes e85 tune got me .23 improvement from [email protected] to [email protected]. Stock mani, airaid , 3c, alum ds, front sway delete, 275 40 17 nt05r eibach prokit

Posted via Topify on Android

 

[125oh]

I plan on doing e85 later this summer , with 100 shot to get into the 10s

 

[5.0 Silverback]

11.6 sounds right @ 120

 

[JLear]

I'm going to guess 11.6-11.8. In my experience with a 4c, the converter was only good for about a .25 gain.

 

[125oh]

Jlear , nice times . What 60 ft times are you able to get ?

 

[JLear]

Jlear , nice times . What 60 ft times are you able to get ?

1.60 was the best, average was around a 1.65.

 

[125oh]

No suspension mod ? What size tire ?

 

[JLear]

No suspension mod ? What size tire ?

Bmr lca's and relocation brackets, 295-55 et streets.

 

[125oh]

Bmr lca's and relocation brackets, 295-55 et streets.

thats what tire im running , do you feel it needs more gear or are the 3.15 fine?

 

[JLear]

3.31's seem to show improvements but personally I wouldn't replace them unless there was another issue that required removing the gears. I'm adding a power adder and think the stock gears will get me where I want to be.

 

[125oh]

any tips on converter install?