What did you do for your Terminator today?

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,821
Location
El Paso, TX
Everything is so damn expensive nowadays but modding cars was never cheap so I digress lol.

MalcolmV8 is a Fore dealer and can help you out.
I believe Kevin Dunn 04sleeper is as well.

I did the Fore Level 1E.

He asked if I wanted it to prime like factory (2 second prime VS run all the time key on). I said yes. To do this you have to add a $7 relay onto the FC3. Then he suggested just running two of these, one for each pump, and scratching the $300 controller which is actually just a packaged dual relay. Have to be comfortable wiring but it’s all between the FPDM and pump harness.

I also didn’t do rails as the 2.9 was on the car already.

Upgraded to 465s.

Came out around $1200 or so.


Sent from my iPhone using the svtperformance.com mobile app
 

HPLouis

Well-Known Member
Established Member
Joined
Sep 27, 2002
Messages
1,713
Location
New York City
All I did today was a drive around the neighborhood and I loved it.

IMG_3979.JPG



Sent from my iPhone using the svtperformance.com mobile app
 

olympic

Well-Known Member
Established Member
Joined
Dec 28, 2014
Messages
3,544
Location
Canada
20220811_214741.jpg

Bought a new Gates RPM belt because the old one was starting to fray on the front edge. After checking my pullies with the laser tool, turns out the blower pulley was about 1/2 a rib too far back. I made a spacer out of sheet aluminum to bring the pulley forward. Hopefully that saves the belt in the future.

Also found this little issue. The rear mounting tab on my Moroso Coolant tank broke right off, likely thanks to our ridiculously rough roads...lol!

20220811_214848.jpg


I have no way to weld aluminum so JB Weld to the rescue...lol! Looks a little rough but I repolished the tank afterwards and it's not even visible once installed.

20220811_220317.jpg


20220813_214111.jpg


Also hit up a car show today at a local diesel performance shop and they were doing dyno runs for $100. DA was terrible and everyone's numbers were low. I missed the highest HP award by 3hp...lol!



Won the Best Performance Vehicle trophy though!

20220813_214155.jpg
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,490
Location
Cheshire, CT

TerminatoRS

Well-Known Member
Established Member
Premium Member
Party Liquor Posse
Joined
Jul 29, 2019
Messages
2,395
Location
Wisconsin
Work had a car show over the weekend. Took home 3rd place. Surprised I won anything actually. Couple really nice classics came out.
 

Attachments

  • B0A53284-70F8-461E-B0DE-4CFFFFB42AF4.jpeg
    B0A53284-70F8-461E-B0DE-4CFFFFB42AF4.jpeg
    361.7 KB · Views: 68

Users who are viewing this thread



Top