We’re you able to keep AC with an On3 turbo on your Mach

Canuckstang

New Member
Established Member
Joined
Oct 22, 2016
Messages
12
Location
New Brunswick
I’ve done some searching but can’t find an answer. I’m currently installing the On3 forward facing turbo kit on my Mach1. It doesn’t look as though I’ll be able to keep the AC since one of the lines is keeping the turbo from sitting directly on the turbo mounting flange. I’m thinking of removing said line and modifying it once everything else is installed. Anyone else run in to this?
 

Canuckstang

New Member
Established Member
Joined
Oct 22, 2016
Messages
12
Location
New Brunswick
I’ve done some searching but can’t find an answer. I’m currently installing the On3 forward facing turbo kit on my Mach1. It doesn’t look as though I’ll be able to keep the AC since one of the lines is keeping the turbo from sitting directly on the turbo mounting flange. I’m thinking of removing said line and modifying it once everything else is installed. Anyone else run in to this?

60460609708__E41D32C2-855A-4921-BFB7-E5FFB12562CA.JPG




Sent from my iPhone using the svtperformance.com mobile app
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
15,913
Location
Central Fl
Unbolt the hanger for that little canister and see if you can twist it out of the way. Had to do that with my procharger but the heat may be an issue if you can’t secure it away from the piping
 

Canuckstang

New Member
Established Member
Joined
Oct 22, 2016
Messages
12
Location
New Brunswick
Unbolt the hanger for that little canister and see if you can twist it out of the way. Had to do that with my procharger but the heat may be an issue if you can’t secure it away from the piping

Well I am able to bend the rubber part down and zip tie it to the fan shroud. The bigger issue is the hard part of the line is interfering with the compressor housing and won’t let the turbo set down all
The way
60460717058__55317CFA-E2A3-4581-A99C-582B1F6A01C6.JPG
60461001581__67C154CC-17CA-4683-B346-23DB6094A520.JPG



Sent from my iPhone using the svtperformance.com mobile app
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
15,913
Location
Central Fl
Yaaa. It sure what to say about that. You might be able to gently tweak it over but don’t know if it’ll be enough without messing it up
 

TKat13

Under Construction
Established Member
Joined
Feb 2, 2011
Messages
35
Location
DFW
I purchased a new line from Motorcraft, has a bend right by the filter.
uLzzkAtQLou78EhruEftgsFoXNw-xYTT8MiwdZFAEAGItTrwwt0w709oEgr3DaHhdqzkh6-RMg59kovqPI=w774-h1031-no.jpg

zpxty4Iwu7nVYRHkDIm8lttHK_2aj9zpg4rFbqTkyoWM1S-l4VkAS3BzVqksK8ODyu5VFRI_TM6szjTNbg=w774-h1031-no.jpg


Here is the part: Motorcraft #YF2854
I picked one up on Amazon at the time.
 

Westtt80

New Member
Established Member
Joined
Sep 2, 2020
Messages
18
Location
Delaware
I have that kit on the car I just bought. The AC was deleted. My radiator fan is on the front of the radiator also
 

Lee H

New Member
Joined
Jul 2, 2017
Messages
1
So you found what you needed?
I kept air p/s all that stuff with a 6-71 on a fox.
there is a place that makes air lines about any way you want and there not
overly expensive . Let me know if you still need something and I will if I can
figure out who it was
 

Canuckstang

New Member
Established Member
Joined
Oct 22, 2016
Messages
12
Location
New Brunswick

Users who are viewing this thread



Top