VMP 2.3L TVS Supercharger Upgrade-Free Shipping & 0% Financing for up to 1 year!

TPSMak

Authorized Vendor
Authorized Vendor
Joined
Apr 12, 2005
Messages
3,766
Location
san jose, CA/ Norcal
VMP TVS SuperChargers Sale -Free Shipping & 0% Financing for up to 1 year!

-0% financing up to 1 year!


-If your interested in picking one up please feel free to contact me at 408/898-4632 or [email protected]





cobratvs_2.jpg


Description
The VMP 2.3L TVS Supercharger upgrade is a direct replacement for the factory Eaton M112 Supercharger on the 2003-2004 "Terminator" Mustang Cobra. It was designed from OEM CAD data to fit perfectly and clear the stock hood.

The VMP TVS is the first aftermarket supercharger housing made specifically to fit the Cobra. It is a one piece housing with a side inlet like the factory supercharger. The one piece design makes for a very rigid housing, allows for a larger rear inlet, decreases the chance of vacuum leaks, and makes installation easier.

With the VMP TVS you get the reliability of an Eaton blower and the performance of the TVS rotorpack design. The Twin-Vortices-Series compressor has proven itself to be highly efficient over a wide operating range of 10-22+psi. It is a high twist symetrical 4-lobe rotor design with excellent adiabatic effiency. TVS technology is used on the 2013 GT500, ZR1 Corvette, and ZL1 Camaro.

VMP 2.3L TVS Supercharger upgrade key features:

-Direct replacement for stock supercharger
-Gains of 100-350RWHP depending on pulley size & boost level
-1 year warranty provided by VMP
-Proven Eaton reliability: 100,000 mile service interval
-Pre-filled with oil
-Intercooler bolts directly to bottom of blower
-Side inlet for easy access to fuel rails
-Side inlet allows use of different throttle body styles
-Vacuum line connections and T-MAP in factory locations
-Large 45MM bypass-valve for cooler operation, improved driveably, and greater fuel efficiency
-Removes EGR system and boost dump valve for a cleaner look and better performance

Package Includes:
-VMP TVS Blower with stainless steel 6-bolt hub
-One pulley of your choice
-Inlet elbow for your throttle body style
-Six M6x14MM bolts for pulley
-Four M6x25MM bolts for elbow
-Ten M5x16MM intercooler bolts
-O-ring for inlet elbow

Installation:
-The factory supercharger to lower intake manifold gasket is metal and can be re-used in most cases
-The factory IAC gasket may be re-used in most cases
-The TB gasket may be re-used in most cases, aftermarket TBs usually include a new gasket
-If you still have EGR you will need to remove it and cap the header or manifold, select option above.
-EGR is easily turned off in the calibration to prevent a check engine light. Many emissions tests allow for one or two systems failed.
 
Last edited:

rudycobra

New Member
Established Member
Joined
Nov 4, 2009
Messages
3,123
Location
boutte louisiana
Pm me a price to . Prolly to early for me to pull the trigger but maybe soon . Wat throttle body is needed and intake ?? I have dragon with Jlt cai . Thanks


Rudy
 

Senkak

SVT Poster
Established Member
Joined
Sep 16, 2005
Messages
5,643
Location
Orlando
Hey Mike,
In case you missed the thread, We recently converted my car to run on E85.
At a tad over 20lb it make 718/678!!!!
With the new power I got a new PB of 10.29@134 in my heavy vert.

RickTVSE85-1.jpg
 
Last edited:

SatinSnake

Member
Established Member
Joined
Jun 13, 2012
Messages
133
Location
Tulsa
Hey Mike,
In case you missed the thread, We recently converted my car to run on E85.
At a tad over 20lb it make 718/678!!!!
With the new power I got a new PB of 10.29@134 in my heavy vert.

RickTVSE85-1.jpg

Holy shhnake, I may have to finance a tvs for my financed cobra. The american way.
 

rudycobra

New Member
Established Member
Joined
Nov 4, 2009
Messages
3,123
Location
boutte louisiana
Hey Mike,
In case you missed the thread, We recently converted my car to run on E85.
At a tad over 20lb it make 718/678!!!!
With the new power I got a new PB of 10.29@134 in my heavy vert.

RickTVSE85-1.jpg

So wat power did u make before the e85 ? It's not to easy to come by here


Rudy
 

Users who are viewing this thread



Top