Valve / Cam Cover Question

[Nervouswreck]

I want to buy a pair of Valve Covers to change the look of my 03 Cobras engine after my engine build , i found a very nice set off of a 04 Mach 1 ,,,, will they fit my Romeo engine ? Thanks


Sent from my iPhone using the svtperformance.com mobile app

 

[MG0h3]

Not sure but I suspect they will.

Why not just have yours powder coated how you want them?


Sent from my iPhone using svtperformance.com

 

[01yellercobra]

AFAIK the main differences in the 4V valve covers is the placement of the passenger PCV hole. The bolt pattern is the same. I think I had a set of Continental covers on my 03 heads. The PCV was in the back by the firewall.

 

[Nightmare90gt]

My mach has a port on the rear of the driver side cover. On the passenger side there is a port near the front. All 4v covers will bolt up to the heads just make sure your pvc setup matches

 

[cj428mach]

The mach has a bolt on sensor on the pass side pcv location. These 2 holes have to be dealt with other than that the covers are the same as cobras.