used kenne bell 2.2 install

[smith876]

I searched trying to identify this, but have come up empty.

Just purchased a used KB 2.2, and was wondering what else do I need to install it? I literally just got the blower - - but am wondering if I need any sort of a gasket? Or new bolts for the IC?

I have read about zip-tying or clamping the hoses during the install, and know I need to get those already. Anything else that you can think of!

Thank you in advance!
-Josh

 

[unit213]

The lower intake manifold gasket should be re-usable. You'll definitely need
new bolts to secure the intercooler to the KB blower. Those bolts are one-and-done.
You shouldn't reuse them.

It's a pretty straight forward install. You have the directions right?

 

[smith876]

It's a pretty straight forward install. You have the directions right?

I found a copy of the install destructions from the Lethal website, so all set there!
Will be sure to get a set of the IC bolts - Thank you!
-Josh

 

[boston03cobra]

did it come with the little l bracket to attach the throtel cable.

 

[smith876]

did it come with the little l bracket to attach the throttle cable.

Just looked at a picture on the install manual - looks like I am missing the bracket that would attach the throttle cables. Looks like 1 or 2 bolts hold that on - - another one to add to the list.

Thanks!
-josh