"Transport Mode Contact Dealer"

[02GTKB]

So my car shows "transport mode contact dealer" in the info screen..Is there a way to turn this off? I searched online and came across a few things like driving a certain amount of miles or key cycles..I have 120 miles on it and still displays this..Im sure it is something easy that I am missing

 

[Snoopy49]

This is from the 2013 GT500 Owners Manual Supplement

Alternate calibration
Your Shelby GT500 power train control module (PCM) strategy contains a feature to limit supercharger boost pressure and engine speed to 4,000 rpm for the first five consecutive miles of vehicle operation or 50 engine start/warm up cycles. This feature is enabled prior to shipment. If neither of these conditions have been satisfied prior to customer delivery, full power will not be available.

 

[Snoopy49]

Transport and Factory Mode Deactivation

Ten things we learned by reading the 2015 Mustang owner’s manual

 

[02GTKB]

This is from the 2013 GT500 Owners Manual Supplement

Huh well for sure over the 5 consecutive miles, maybe its the 50 engine cycles

 

[02GTKB]

Transport and Factory Mode Deactivation

Ten things we learned by reading the 2015 Mustang owner’s manual

That could be what it needs..thanks

 

[Helmet]

With the door closed, Turn ignition on, Pump brakes five times, Flip hazards twice, Turn ignition off, Turn ignition on. that should take it out of transport mode. Or drive it for 100 miles