Trading the cobra in..parts for sale

Oso

New Member
Established Member
Joined
Mar 3, 2005
Messages
427
Location
Scottsdale AZ
I purchased a house and my DTI has to be under a certain percentage to be where I need to be, so these parts are for sale as I'm gonna trade the car in on something cheaper so I will need your stock parts in exchange. Please make offers and pm me please...most parts are only a few hundred miles old. I will not let any parts go off the car until the majority of them are accounted for.


*Engine*
- Stieg stage III port, done in july of 05'($350 with a swap for your stock blower)
- 60# injectors w/ harness's($350 shipped)
- Accufab tb/plenum(new)($400 shipped)
- billett flow 2.76 upper
- lfp 4# lower(installed last week)($290 shipped)
- new alt(less than 300 miles old)
- lfp heat exchanger($175 with exchange)
- billett flow idlers(new)
- 10" filter
- Sct ba2400 maf(new)($210 shipped)
- TR6 plugs
- Diablo preditor, tuned by sambandit.
- KB bap(200 shipped)

*Trans*
- New dfx clutch kit(only 500 miles)($350)
- Liberty 26 spline input(500 miles)($200)
- pro five o shifter($75 w/exchange)
- upr click fire wall adjuster w/ tripple hook quadrant
- fidanza flywheel (500 miles)($200)

*exhaust*
- Bassani x pipe with removable cats w/ replacment pipes($350)
- mac 3" cat back($225 with exchange)
- stock manifolds
- MILS($40)

*rear end*
- billett flow irs brace
- stock 3:55's
- have a set of new 3:90's in box with install kit along with a 33 spline carrier, for the straight axle I was going to install..($375 plus shipping)

*suspension*
- H&R SS springs




*Interior*
- 5% tint
- Boost overlay
- Mini led shift light


*Wheels*
- 18" BBS RK plasma 18x9 fronts with kumho spt's 275/35/18's(1k miles)
- 18" BBK plasma 18x10.5 in the rear with 335/30/18 nitto dr's(200 miles) (Exchange with stock wheels and $7-800)
 
Last edited:

Red99SVT

New Member
Established Member
Joined
Dec 8, 2002
Messages
2,797
Location
Cartersville, GA
Interested in lots of stuff..Injectors and harnesses, Wheels, BAP, Heat Exchanger, etc..Please PM me with your bottom dollar on all of it.
 

o0rikio0o

New Member
Established Member
Joined
Oct 2, 2005
Messages
542
Location
on the edge
Oso said:
I purchased a house and my DTI has to be under a certain percentage to be where I need to be, so these parts are for sale as I'm gonna trade the car in on something cheaper so I will need your stock parts in exchange. Please make offers and pm me please...most parts are only a few hundred miles old. I will not let any parts go off the car until the majority of them are accounted for.


*Engine*
- Stieg stage III port, done in july of 05'
- 60# injectors w/ harness's
- Accufab tb/plenum(new)
- billett flow 2.76 upper
- lfp 4# lower(installed last week)
- new alt(less than 300 miles old)
- lfp heat exchanger
- billett flow idlers(new)
- 10" filter
- Sct ba2400 maf(new)
- TR6 plugs
- Diablo preditor, tuned by sambandit.
- KB bap

*Trans*
- New dfx clutch kit(only 500 miles)
- Liberty 26 spline input(500 miles)
- pro five o shifter
- upr click fire wall adjuster w/ tripple hook quadrant
- fidanza flywheel (500 miles)

*exhaust*
- Bassani x pipe with removable cats w/ replacment pipes
- mac 3" cat back
- stock manifolds
- MILS

*rear end*
- billett flow irs brace
- stock 3:55's
- have a set of new 3:90's in box with install kit along with a 33 spline carrier, for the straight axle I was going to install..

*suspension*
- H&R SS springs




*Interior*
- 5% tint
- Boost overlay
- Mini led shift light


*Wheels*
- 18" BBS RK plasma 18x9 fronts with kumho spt's 275/35/18's(1k miles)
- 18" BBK plasma 18x10.5 in the rear with 335/30/18 nitto dr's(200 miles)

PMed
 

Oso

New Member
Established Member
Joined
Mar 3, 2005
Messages
427
Location
Scottsdale AZ
I'm sorry guys as the car is on ebay, but more than likely will not sell seeing how these cars are not selling well.....I will still keep all of your pm's and I'm putting a price sheet up on the parts so if the car dont sell then I can take parts off and ship asap.

Thank you all, and the prices will be up shortly.
-steve
 

coolguy10786

Active Member
Established Member
Joined
Jul 23, 2005
Messages
2,682
Location
US
Do you know if the straight pipe on the Xpipe that goes in place of the cats would fit a 96 bassani catted X? Im wanting to go O/R w/o having to buy new pipe
 

QWKRN U

1 0f 72 Build #159
Established Member
Joined
Aug 10, 2005
Messages
1,344
Location
O'Fallon, MO
PM me a package price on the following
Trans*
- New dfx clutch kit(only 500 miles)($350)
- Liberty 26 spline input(500 miles)($200)
- upr click fire wall adjuster w/ tripple hook quadrant
- fidanza flywheel (500 miles)($200)
-Minishift light
 

coolguy10786

Active Member
Established Member
Joined
Jul 23, 2005
Messages
2,682
Location
US
Still would be interested in MIL's and the replacement pipes as long as they would fit my bassani x pipe, as long as the cats r the same i don't see why they wouldn't
 

Users who are viewing this thread



Top