through floor subframe connectors?

keith89

Well-Known Member
Established Member
Joined
Mar 29, 2007
Messages
1,473
Location
Wood-Ridge, NJ
Hey guys, I have a 6 point roll bar welded in along with steeda full length subframe connectors. I plan to get stiffler's rail stiffeners, web brace, and spider brace(already have their kmember brace). I was wondering if it is still worth getting through frame subframe connectors or if the additional stiffness would not be worth the weight penalty with the 6 point and stifflers system already installed.

I no longer need to worry about any class rules as I just do track rentals now so basic safety is covered.
 

dazwelding

Active Member
Established Member
Joined
Mar 25, 2013
Messages
131
Location
SC
I fabricated my through the floor subframe connectors, but I cannot tell you how the compare to the stifflers. I can say that if I had to do it again, I would likely go with the stifflers. The through the floor were a ton of work, and for me to admit that is saying something. I would recommend calling stifflers and asking them if they know what the performance difference would be between the two styles of connectors. Let us know what you go with, I would be curious to hear.
 

Users who are viewing this thread



Top