Those who removed that in cabin sound tube from the oem intake??

Brutal Metal

Well-Known Member
Established Member
Joined
Feb 2, 2009
Messages
10,571
Location
Largo Florida
Where did you find a 1.5" rubber cap for the plastic elbow? I've looked everywhere and the biggest vacuum caps I see are 3/4"... I have duct tape on it now...
 

crfrider16

Heretic
Established Member
Joined
Mar 12, 2010
Messages
827
Location
Flemington, NJ
I used a rubber end for a chair leg. Fits perfectly. I forget the size but any hardware store will have it. Like 50 cents.

20170114_103749_zpswpyzm4mm.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
 

Brutal Metal

Well-Known Member
Established Member
Joined
Feb 2, 2009
Messages
10,571
Location
Largo Florida
I used a rubber end for a chair leg. Fits perfectly. I forget the size but any hardware store will have it. Like 50 cents.

20170114_103749_zpswpyzm4mm.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
Now that I look at this photo it confuses me, so you have a rubber chair leg end stuffed inside that hole? so you buy smaller than 1.5" and press it in there?
 

crfrider16

Heretic
Established Member
Joined
Mar 12, 2010
Messages
827
Location
Flemington, NJ
Now that I look at this photo it confuses me, so you have a rubber chair leg end stuffed inside that hole? so you buy smaller than 1.5" and press it in there?
Exactly. It's a press fit. Not going anywhere, but you could dab a little silicone around it if you want to.

20170119_165538_zpsovvyunez.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
 

Brutal Metal

Well-Known Member
Established Member
Joined
Feb 2, 2009
Messages
10,571
Location
Largo Florida
Finally I ended up finding some nice 1.5" end plugs at a small hardware store. They have varying size fins so it accepts 1.25-1.45 inner diameter, I used a nail clipper to trim them like a previous poster in this thread said and it worked out great the fit is snug. It came in a 6 pack bag so I have spares, if anyone wants one send me a private message. Here's what they look like

54_zps0lm1v9gy.jpg

56_zpseou6c0q0.jpg
 

Users who are viewing this thread



Top