• Welcome to SVTPerformance!

T-45 bolts?

Discussion in 'SN95 Cobras' started by SVT CAMR, Apr 11, 2011.

  1. SVT CAMR

    SVT CAMR Active Member Established Member

    Messages:
    1,447
    Joined:
    Mar 12, 2009
    Location:
    Chi-Town Burbs
    How many bolts are used to bolt the T-45 up to the block?

    Any Pics or measurements of the bolts available?

    I have what I think are the correct bolts but not sure they are all there.
     
  2. 98fourvalve

    98fourvalve Member Established Member

    Messages:
    653
    Joined:
    Aug 24, 2010
    Location:
    indiana
    there are 7 that hold it up. a few longer than the others though.
     
  3. 98 N/A 4V

    98 N/A 4V Active Member Established Member

    Messages:
    2,495
    Joined:
    Sep 14, 2004
    Location:
    Tampa, FL
    They are all the same size except for 2 on the sides. There are ears on the block about at the 9 and 3 o'clock position. Maybe 1/2" longer than the other 5. Oh and also need the flex plate bolts (2).
     
  4. SVT CAMR

    SVT CAMR Active Member Established Member

    Messages:
    1,447
    Joined:
    Mar 12, 2009
    Location:
    Chi-Town Burbs
    Thanks for the reply. I have 6 bolts so I'm atleast 1 short. My longer bolts are just a tad longer than the shorter ones. I will post up a pic. and maybe we could take it from there. I just want to be ready when the time comes. I sold my TKO and I'm putting a t-45 back in. For what ever reason I cannot find the bolts I saved. Someone just sent me what they thought were the bolts I needed. Thanks for your help. anybody else have any sizes or pics of them for me?
     
  5. SVT CAMR

    SVT CAMR Active Member Established Member

    Messages:
    1,447
    Joined:
    Mar 12, 2009
    Location:
    Chi-Town Burbs



    Does that make 9 total then?

    Looks like the bolts I have are good then. I have the 2 bolts for 9 and 3 oclock and 4 out of the 5 half inch shorter ones. Then your saying there are 2 more for the spacer? Is that correct?
     
    Last edited: Apr 11, 2011
  6. 98 N/A 4V

    98 N/A 4V Active Member Established Member

    Messages:
    2,495
    Joined:
    Sep 14, 2004
    Location:
    Tampa, FL
    Danny, found this... Scroll down to section 18. There is a good pic of the bolt pattern. You'll notice the ears on the block when you go to mount the tranny. The bolt will stick out the block once all the way tight.

    Tremec T45 Transmission Removal
     
  7. SVT CAMR

    SVT CAMR Active Member Established Member

    Messages:
    1,447
    Joined:
    Mar 12, 2009
    Location:
    Chi-Town Burbs
    Thanks a lot Mark! The Guy that did that write up did a GREAT JOB! Thank you.

    I do have those lower bolts to hold the spacer. Looks like I'm short 1 bolt.
    trans003.jpg
     

Share This Page