Suspension Upgrades People

[KingCobra10Sec]

Update:

I bought the following and all of the parts are here now
UPR Rear Coil Over Kit
UPR Extreme HD Lower Control Arms w/Tool Steel Sleeves & Hardware
MM HD Torque Arm Kit
MM Panhard Bar
(not a suspension part but would like to mention) N2MB WOTBOX (2 Step) going to launch at 15psi)

This is what I currently have
FRONT:
Eibach Pro Kit GT Springs
UPR Front Coilovers
UPR K Member
Bilstein Struts
UPR A Arms
UPR Caster Camber Plates
Steeda G Trac Bar
Steeda Strut Tower Bar

Rear:
Tokico 5 Way Adjustable Shocks
Eibach Pro Kit GT Springs
UPR Lower Control Arms Drag (Coming off PM if interested)
GT Sway Bar
Granatelli Upper Control Arms (Coming off PM if interested)

I will add the little stuff over time, my wallet needs a break from this way over budget project.

Also getting tuned at the same time.

 

[cobraracer46]

Not a big fan of the UPR suspension products. Keep a close eye on the chromoly parts as they can work harden and crack over time.:bash:

 

[98 N/A 4V]

Update:

I bought the following and all of the parts are here now
UPR Rear Coil Over Kit
UPR Extreme HD Lower Control Arms w/Tool Steel Sleeves & Hardware
MM HD Torque Arm Kit
MM Panhard Bar
(not a suspension part but would like to mention) N2MB WOTBOX (2 Step) going to launch at 15psi)

This is what I currently have
FRONT:
Eibach Pro Kit GT Springs - ***
UPR Front Coilovers - ** You running coilover over strut or a spring/strut combo? These two are contradicting.
UPR K Member
Bilstein Struts
UPR A Arms
UPR Caster Camber Plates
Steeda G Trac Bar
Steeda Strut Tower Bar

Rear:
Tokico 5 Way Adjustable Shocks
Eibach Pro Kit GT Springs
UPR Lower Control Arms Drag (Coming off PM if interested)
GT Sway Bar
Granatelli Upper Control Arms (Coming off PM if interested)

I will add the little stuff over time, my wallet needs a break from this way over budget project.

Also getting tuned at the same time.

Front struts are adjustable? What front spring rate for the coilovers. That is if you're running coilovers.

-Mark

 

[KingCobra10Sec]

if my springs were taking out during the upr coil over installation I guess thats a part I have to talk to my shop about

 

[Tremor]

Update:

I bought the following and all of the parts are here now
UPR Rear Coil Over Kit
UPR Extreme HD Lower Control Arms w/Tool Steel Sleeves & Hardware
MM HD Torque Arm Kit
MM Panhard Bar
(not a suspension part but would like to mention) N2MB WOTBOX (2 Step) going to launch at 15psi)

This is what I currently have
FRONT:
Eibach Pro Kit GT Springs
UPR Front Coilovers
UPR K Member
Bilstein Struts
UPR A Arms
UPR Caster Camber Plates
Steeda G Trac Bar
Steeda Strut Tower Bar

Rear:
Tokico 5 Way Adjustable Shocks
Eibach Pro Kit GT Springs
UPR Lower Control Arms Drag (Coming off PM if interested)
GT Sway Bar
Granatelli Upper Control Arms (Coming off PM if interested)

I will add the little stuff over time, my wallet needs a break from this way over budget project.

Also getting tuned at the same time.

I thought you got your tune in Jan ? Did you get 725rwhp ?

:beer:

 

[KingCobra10Sec]

I thought you got your tune in Jan ? Did you get 725rwhp ?

:beer:

I got the break in tune in january when I picked up my car, dyno numbers to come soon, on the break in tune I zoomed past a few cobra on the cruise all of them had 500+RWHP and I pulled them pretty easy, and that was shifting at only 5k.

Also been busy with some career stuff so the car hobby had to take a side step for the moment.