Stock Suspension - 315 OK on 17X10 SVE 10th Anniversary Rear

[slseals]

So, I just got my car repainted and now I want to get some black wheels. I really like the SVE 10th anniversary gloss black wheels and was looking at the staggered 17 X 9/10. Can I run the Nitto NT555 G2 315/35 17 on the rear with no issues on stock IRS and suspension?

 

[01yellercobra]

I think the 17" rims are 10.5" wide. That being said they'll be fine. You'll probably either need to shave the IRS bolt or get a low profile version. Might need to roll the fenders too. You won't know until its mounted.

Lots of discussions on it.

 

[slseals]

The LMR website says they are 10" and the offset and backspacing is different than the other discussions I could find.
Size: 17x10
Backspacing: 6.29"
Offset: +20mm
Lug Pattern: 5x4.5
Weight: 21.98lbs

 

[GodStang]

I think the 17" rims are 10.5" wide. That being said they'll be fine. You'll probably either need to shave the IRS bolt or get a low profile version. Might need to roll the fenders too. You won't know until its mounted.

Lots of discussions on it.

I agree pretty sure they are 10.5" but I am running 315 Mickey Thompsons which use to be wider than the Nittos and had to shave my bolt to a height of 1/4".

 

[patc84]

get low pro IRS bolts and let it eat.

 

[slseals]

Ok, got the wheels, got the IRS bolts thought it was all good but the center caps won't go on. The hub/shaft is about 1/4 inch too long to allow them to snap on. If I go with a 8mm (5/16ths) backspacer will the original lug bolts be long enough? If not, what length do I need?

Sent from my LG-H910 using Tapatalk