steeda PCV oil separator install ?

[cobra=trouble]

I have one I need to install I was looking at hoses on the separater there small. WhereI. does. this tie into ? I had for over a year lost instructions. I don't think it goes into the big hoes going to the vavle cover . I see smaller hoses similar behind my kb 2.6 dose it. Tee into that house ? Any pics . Would be a big help Thanks

EDITED...my s pen was freaking out still getting used to this new G Note 2

 

[racecougar]

A oil separator will install in the PCV line between the PCV valve and the plenum.

 

[Tractionless1]

This Steeda Oil Separators for Ford Mustang - Free Shipping!

If so don't even bother. I made one myself with the same parts and the reservoir is way too small. Oil would blow right through, it had to be emptied weekly, and the blower etc. was coated in oil. I got an UPR unit and it's not even close to needing emptying at each oil change.

 

[racecougar]

Wow! Steeda sure charges an arm and a leg for what amounts to a $20 trip to your local hardware store. For the record, I agree with Keith: I've run that setup in the past, and it was more hassle than it was worth. I switched over to a UPR separator as well.

 

[cobra=trouble]

This Steeda Oil Separators for Ford Mustang - Free Shipping!

If so don't even bother. I made one myself with the same parts and the reservoir is way too small. Oil would blow right through, it had to be emptied weekly, and the blower etc. was coated in oil. I got an UPR unit and it's not even close to needing emptying at each oil change.

Thanks everyone. I have a steeda I think ? .lethal makes one .I can't remember been over a year have to take a pic of it