stage 6 dyno numbers!!!

00gmsonoma

New Member
Established Member
Joined
Oct 28, 2009
Messages
113
Location
kc,MO
dyno tuned 04 cobra today. Has stage 6 blower series 2 throttle body and plenum. 8lb lower 3.25 upper with carbonite coating and 90mm aux idler with hd belt. 2400 maf, 80lb injectors, 40 amp bap, off road pro chamber with borla stingers. videos are from iphone sorry for quality. Let me know if im in the correct area for this combo thanks.
99a14c2e-d385-4938-9a63-83607b062074.gif

th_cobra33333.gif

th_cobra11111.gif

th_IMG_1195.gif
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,529
Location
Cheshire, CT
Does sound really nice, and great numbers. Looks like you're up at around 18 lbs. max boost?
 

00gmsonoma

New Member
Established Member
Joined
Oct 28, 2009
Messages
113
Location
kc,MO
ya 17.5 or so spikes then drops to 15 i guess thats typical for an eaton. I was hoping for the 550+ torque but some reason i didnt get it this is on 19 degrees timing up top.
 

Riddick

MERICA
Established Member
Joined
Oct 25, 2012
Messages
2,640
Location
Dayton, OH
Nice numbers, wonder how much you would pick up with a set of LTs on the car. Do you plan on taking it to the track?
 

00gmsonoma

New Member
Established Member
Joined
Oct 28, 2009
Messages
113
Location
kc,MO
Ya ill run at local 1/8 prob. Numbers are lower than others dunno if its just dyno or what
 

03mustang92

1of154
Established Member
Joined
Dec 10, 2009
Messages
1,010
Location
Nebraska
nice numbers, i make 520/490 with a stage 4 on e85 2.8upper, u definately make wayyy more torque than me. Sounds great too!
 

mustangmanjeff

Active Member
Established Member
Joined
May 8, 2005
Messages
4,228
Location
somewhereland mexico CT
NICE!!

nice numbers! but why such big injectors 80lb injectors seem over kill?, I know its a stage 6 port but its a 500+hp car with a stock ported eaton, I think 60lbers would been more then enough I see guys with 100-200+more hp then that with 60lbers.
 

Users who are viewing this thread



Top