Spindle Shafts

[TERMINATORSAINT]

Hey everyone. Looking for some guidance on how to clean up the spindle shafts and half shaft splines as they have rust / grime on them, before I mount new hubs and knuckles.

Is it along the lines of brake clean and a dremel with 600 grit sand paper? Appreciate your time.

Matt

 

[01yellercobra]

Are you talking about the outer stub on the half shafts? If so I wouldn't use sand paper. Probably brake clean and a wire brush.

 

[TERMINATORSAINT]

Yeah, the part that presses into the knuckle. Alright. Thank you

 

[01yellercobra]

Don't forget to use some antisieze when you put everything back together.