Hello fellas im doing a termi swap on a clean 93 lx coupe but im using a big stuff 3 with the smart coils and motions raceworks bracket and my concern is clearing the coils with the vmp 2.3 and shelby gt throttlebody and elbow im using . Has anyone gone this route on a blower termi before if so please point me in the right direction I want to put a tube and filter I dont want an open tbrottle body .
Smart coils n bracket on a termi
- Thread starter 305Cobra
- Start date
Do you already have the coils and brackets?
If so, just bolt it up and see what happens!
Worst case you have to modify the bracket and move it some. If that doesn't work build a couple of brackets off the fire wall on each side and mount them there and run a bit longer plug wires! I've seen that done on a few cars that were running top mount blowers.
Ken
If so, just bolt it up and see what happens!
Worst case you have to modify the bracket and move it some. If that doesn't work build a couple of brackets off the fire wall on each side and mount them there and run a bit longer plug wires! I've seen that done on a few cars that were running top mount blowers.
Ken
Users who are viewing this thread
