Short runner intakes

[rapido]

SSR DOHC Intakes

 

[DVJ38]

Look on page 4

 

[rapido]

Look on page 4

No need to now. I started a new one because that thread was closed..why I dunno.

 

[SKMCOBRA]

Where can I find a writeup now?

 

[na svt]

Where can I find a writeup now?

1. remove the runners by heating the intake with a MAPP torch
2. remove a 1.5" section of each runner
3. weld the belled end back onto the runner
4. cleanup any casting flash/weld/roughness before reinstalling the runners
5. reinstall the runners using west systems epoxy

check out my facebook page for pics
.
.
.
..

 

[na svt]

Where can I find a writeup now?

1. remove the runners by heating the intake with a MAPP torch
2. remove a 1.5" section of each runner
3. weld the belled end back onto the runner
4. cleanup any casting flash/weld/roughness before reinstalling the runners
5. reinstall the runners using west systems epoxy

check out my facebook page

Welcome to Facebook - Log In, Sign Up or Learn More