Sai

[Vigilante]

All I keep seeing it that t's so easy... that I feel like an idiot.

Can anyone put up a picture of what I'm looking for? Its that big stupid thing with the heater hose sticking out of the passenger side right behind the radiator, right?

Anyway, attempting to remove the EGR and SAI shortly so any help would be great

 

[cbrown9064]

Yes, that is the secondary air injection. You can take it all off and leave the valves on (connected to the tubes leading to the manifolds) and then tune it out.

Otherwise if you are doin headers, just tune it out.

On a side note, I got rid of mine for clearance issues with the blower ( no cats). Tried to find/make a cap to close off the fitting in the manifold. No go. Those are 45 degree flares with metric fittings. Only way was to use a injection tube, cut it short and weld it shut. Those fittings don't exist in the real world.

 

[SVTCOBRA9629]

Cut the fasteners off the tubing and insert a dime with very little heat RTV. I have used this on a couple cobras no problem.