rough idle

svt20021

New Member
Joined
Mar 16, 2023
Messages
3
Location
wyoming
a 2002 came into the shop been to 3 shops one to get rebuilt another to put it back in and a third to wire everything it's been about a 4 year ordeal for the guy he brought it in not running or cranking even i looked around and plugged in as much as i could find and got it to start and hold idle but its idling between 450rpm to 900 and its rough all injectors are pulsing all plugs are sparking fuel pressure is good but if you try to rev it up it will die unless you go very slowly and if it does rpm then the exhaust smells quite lean i was wondering if anyone knew the injector pulse width or if this could be caused by a vacuum leak it's not showing any codes ipw is around 5ms at idle witch seems like it should be fine to me any insight is apricated thanks
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
15,905
Location
Central Fl
does anyone know for sure if it's tuned for whatever may have been changed during this whole ordeal?
 

hotcobra03

Well-Known Member
Established Member
Joined
Mar 11, 2007
Messages
7,461
Location
poteet,texas
Clogged Exhaust,,

Vacuum guage will help.

My son just purchased a used truck. 1 issue he had was Clogged cat, causing truck to run like yours ,,no power and stall ,.

Who ever had this before pulled rear 02 to free Exhaust,
 

Users who are viewing this thread



Top