rear only springs

[turbosha]

I think I want to lower just the back for now. is there a spring I can buy for the rear?
maybe a 05-09 v6 car or something, that will lower the rear about 1.25".
does anyone have any input?????
I will be doing a coil over front. so buying a $250 set of front and rear springs will be a waste. or at least a half waste.:shrug:

 

[1sweetSVT]

Bmr sells just rear springs, 1.25 advertised drop

 

[turbosha]

the bmr sp012 rear springs advertise 1.5". this may be a little much with stock fronts.

 

[Holovacko]

Roush sells the springs individually also... Only a 1" drop. It's probably closer to 3/4". It evens the car out.

 

[99arboC]

Here is a set of P springs should be 1 inch drop for the rear. Probably get them for a good price.

http://www.svtperformance.com/forum...una-seca-oe-shocks-struts-frpp-p-springs.html

 

[Cobra 2997]

I think the 55D springs lower the rear just about an inch or so. I have a set I'm going to install once the weather breaks.

Brembo50.com - 55D Spring Kit

 

[dead man walkin]

Cobra 2997 beat me to it.. depending on your suspension the drop .50 to .75 of an inch