Quickest and Fastest Vortech V3 Coyote

WIST2013GT

Active Member
Established Member
Joined
Apr 11, 2016
Messages
420
Location
Madison, WI
Does anyone know what the fastest times are for the Vortech V3 cars happens to be? I know people have gone faster with the Paxton/VMP/Turbo stuff. I'm just curious who has maxed out the V3 and laid down some good times.
 

bunits19714

Active Member
Established Member
Joined
Mar 27, 2015
Messages
500
Location
monroe mi
plenty in the 8's at the 1000' mark- lol. D tony was bottom 10's maybe high 9's I believe before he upgraded to a bigger vortech he has since upgraded blowers again but not sure if he has got it dialed in- we use the same tuner/shop, but I am also not sure if Jeff is still doing his tuning or not. You are just a converter away from the 9's your self.
 

Shadow Grey 03

Well-Known Member
Established Member
Joined
Nov 24, 2007
Messages
7,043
Location
Hilliard, Ohio
plenty in the 8's at the 1000' mark- lol. D tony was bottom 10's maybe high 9's I believe before he upgraded to a bigger vortech he has since upgraded blowers again but not sure if he has got it dialed in- we use the same tuner/shop, but I am also not sure if Jeff is still doing his tuning or not. You are just a converter away from the 9's your self.
I saw him run 9.7x's at Edgewater in Cincinnati with the smaller blower. Rarely ran slower than 9.9x's there. Probably saw him 5 or more times there.
 

lenny127

Member
Established Member
Joined
Jan 1, 2014
Messages
137
Location
Los Angeles
i figure 135+ traps on a maxed out 730 whp v3 is possible so 9.8- 10.2 should be the reasonable limit unless it's some light as hell combo ...... if Shaun on a 3400 lbs s550 NA can run low 10s at 133+ .... i would think 700whp + on 3600 should easily run 9s .... but by the time you doing that you are probably going to upgrade head unit to get another 10 mph out of the car lol
 

lenny127

Member
Established Member
Joined
Jan 1, 2014
Messages
137
Location
Los Angeles
thats very interesting .... i was thinking of adding an 18 manifold to get to 730-740 instead of pullying down from a 3.6 ....always wondered who got the most mph out of this little v3 ... 139-140 is pretty nice
 

Shadow Grey 03

Well-Known Member
Established Member
Joined
Nov 24, 2007
Messages
7,043
Location
Hilliard, Ohio
thats very interesting .... i was thinking of adding an 18 manifold to get to 730-740 instead of pullying down from a 3.6 ....always wondered who got the most mph out of this little v3 ... 139-140 is pretty nice

Friend of mine just swapped to an '18 manifold on an NA car. It was up 20 wheel from 6500-7500. Peak number wasnt up 20, but with a centrifugal that is rpm dependent the higher she will rev the more boost she will make! Add some corn and oil pump gears and let it rip!
 

lenny127

Member
Established Member
Joined
Jan 1, 2014
Messages
137
Location
Los Angeles
Friend of mine just swapped to an '18 manifold on an NA car. It was up 20 wheel from 6500-7500. Peak number wasnt up 20, but with a centrifugal that is rpm dependent the higher she will rev the more boost she will make! Add some corn and oil pump gears and let it rip!

have all that , car makes 700/565 ..was after squeezing out another 30-40 hp with manifold so i dont have to touch the pulley ..... car got a little boring too fast and i dont think ill pop with another 30 lol
 

Shadow Grey 03

Well-Known Member
Established Member
Joined
Nov 24, 2007
Messages
7,043
Location
Hilliard, Ohio
have all that , car makes 700/565 ..was after squeezing out another 30-40 hp with manifold so i dont have to touch the pulley ..... car got a little boring too fast and i dont think ill pop with another 30 lol
Nice. Hopefully it doesnt. Never fun having a motor let go. Been there.
 

Users who are viewing this thread



Top