Question About Front Control Arm Upgrade

[04CYCOBRA]

Hey guys! The front control arm bushings are noisy on my '12 GT (go figure) and before I replace them with the stock parts I was wondering if they can be upgraded using the control arms for a '10-14 GT500? I'm not even sure if the GT500's use different control arms or if they're the same parts as the GT's. I tried looking up part numbers but couldn't find anything conclusive. I searched the web and found lots of info on upgrading to GT500 style LCA's on the '05-'09 GT's, but nothing on the 2012's. Help please

 

[basspro302]

They are the same part#


CR3Z-3078-D

 

[me32]

There should be an upgraded boss version of the front control arm that has stiffer bushing.

 

[04CYCOBRA]

Thanks guys! Appreciate the info

 

[rdplain]

I switched to these when my stockers were worn out.
Steeda 2011-2014 S197 Ford Mustang Front Lower Control Arms ( Stock to .75” Lowered Height, 555 4912 - Free Shipping - Steeda Autosports

 

[bdcardinal]

There should be an upgraded boss version of the front control arm that has stiffer bushing.

They are the same no matter if it is a V6, Boss, GT, Track Pack, or GT500. CR3Z-3078-D for RH CR3Z-3079-D for LH.

 

[me32]

Well theres always this option which were made for the boss 302s and cobra jet.

https://www.cjponyparts.com/ford-ra...I1MB-zR6wValPK7D-ebSivjQzho273KBoCv9wQAvD_BwE

 

[D1984]

I switched to these when my stockers were worn out.
Steeda 2011-2014 S197 Ford Mustang Front Lower Control Arms ( Stock to .75” Lowered Height, 555 4912 - Free Shipping - Steeda Autosports

Steeda is great. I went with their competition control arms since I'm lowered a lot and it made a gigantic difference in handling/steering. Most of that I'll attribute to the longer ball joints and better bushings