Push in style AN Fittings for Valve Covers

MalcolmV8

Well-Known Member
Established Member
Joined
Mar 27, 2003
Messages
7,353
Location
Tampa, FL
Almost paid $40 a piece for those and then realized you can get them on ebay for $5. They work fantastic too.

http://www.ebay.com/itm/262419978866?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

They even have 90s for $9

http://www.ebay.com/itm/262595637215?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

The straight and 90 fittings
BCVMVXAJD_e8RuwCM5OUltlTWZ1OAGhct8NEx7cEJR4tWCg1Xli5YDu7TxaAYRSeErTEQjlcx9qixBVbfZw=w800-h600-no.jpg


Pass side using the 90

7VZNXc9bnxmI87ECeLyVdBOdMxWT0MRJEgyGZLjdn5Xwpn8cF9kev-291UqzWmXSs32UB8VDTdxa-gkg41n=w800-h600-no.jpg


Driver's side using the straight fitting and a 45 degree hose end.

JBjpJhU7KKHFw676MdV98J16zu59F9Gx8P4-AcAfZBa_QeOERmNgxcUxzl9ZTtJP0lPoTP-20IZSXeN_Ylo=w800-h600-no.jpg


Driver's side setup

9AAgZ2-UFOv7pqwpiruAiFnr83812gKYQfhkLRAdecomIAQeRo22bq7H-L7PZJPKrUjvnHNoESbOwtHr_IV=w800-h600-no.jpg


And fitting even better than the factory rubber grommet is the Doorman part # 42055 at your local auto parts store for $2.99. It's listed for a GM but I tried almost everyone in the store and this was the most perfect fit.

W9zJt03wf2CNgNY9AZ9a3fK4LtBhzdpm5dJ_oga_GaMIqTeuDyw4TqkVlXj0hNZ7cpm0xcsQx7PxM1ajdmT=w546-h728-no.jpg
 
Last edited:

MalcolmV8

Well-Known Member
Established Member
Joined
Mar 27, 2003
Messages
7,353
Location
Tampa, FL
I saw you asked on size before edit. I used -10 as that seems plenty big to me and still looks nice under hood. They also offer the fittings in -12.
 

VinnyGT

Member
Established Member
Joined
Nov 20, 2013
Messages
69
Location
Honolulu, HI
Thanks for the leg work Malcolm, picked up the fittings for next to nothing compared to what's advertised on this Fromm vendors and also picked up the same grommets. Snug is an understatement.
 

MalcolmV8

Well-Known Member
Established Member
Joined
Mar 27, 2003
Messages
7,353
Location
Tampa, FL
Thanks for the leg work Malcolm, picked up the fittings for next to nothing compared to what's advertised on this Fromm vendors and also picked up the same grommets. Snug is an understatement.

No problem :beer:

Yes they fit very tightly and will not leak.
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,589
Location
Wesley Chapel, FL
Just looked to pick some up. Looks like they are currently out of the -10 90*.

Hopefully they come back in stock soon. Looks much better
 

MalcolmV8

Well-Known Member
Established Member
Joined
Mar 27, 2003
Messages
7,353
Location
Tampa, FL
Just looked to pick some up. Looks like they are currently out of the -10 90*.

Hopefully they come back in stock soon. Looks much better

Shoot the guy a message and ask him. They were out of stock when I was looking too and the guy immediately put up a new auction for me with additional stock he had.
 

Users who are viewing this thread



Top