Problem with SCT BA2600

evn62719

USMC
Established Member
Joined
Jan 31, 2007
Messages
669
Location
Watson,La
Mods, if there is a better forum for this, please move.

I took my intake piping off of the top of the maf housing to put on a better clamp. After I put everything back together, my car does not want to idle. When I give it gas it sounds like it has a bad miss.

I unplugged the maf and it idles fine. My handheld is giving me the code p1121-Throttle position A (tp-a) inconsistent with maf/map sensor. One of the slots on the plug for the maf harness looks a little burnt, the plug on the maf itself looks fine. I tried reloading the tune but that didnt help.

Anybody have any ideas? I'm stumped here.
 

evn62719

USMC
Established Member
Joined
Jan 31, 2007
Messages
669
Location
Watson,La
Thanks that was it. Did some google'n and I needed to move my air filter over some so the pipeing could sit straighter.
 

ZeroSVT

Member
Established Member
Joined
Jan 22, 2009
Messages
765
Location
Kansas City
Are you sure that your MAF housing is installed in the proper direction? If so clean it with BrakeKleen. Also, do u use LiveLink software? If so post a datalog of it idleing with the MAF connected
 

Users who are viewing this thread



Top