Power Window not working

[SVTORANGE]

My passenger side window will not roll down using either switch.

What should I do to fix it? Which switch do I replace first?

Thanks for your help

 

[Silverfox92]

might not be the switch, could be the motor. Take off the door panel and test for power to the motor.:dancenana:

 

[SVTORANGE]

Just use a volt meter at the motor correct?

Thanks for helping out.

 

[FISHTAIL]

You can even just use a test light if you want.

 

[SVTORANGE]

You can even just use a test light if you want.

Cool - Just my luck if its bad and hopefully I can get it from the local parts store.

 

[Silverfox92]

yes a volt meter or test light

 

[SVTORANGE]

:beer::beer:

 

[Cperrigo]

Usually motor. If your getting power, try to bump the motor when the handle of a hammer or something. The brushes are probably froze up.

 

[SVTORANGE]

Usually motor. If your getting power, try to bump the motor when the handle of a hammer or something. The brushes are probably froze up.

Will try this today - thanks

 

[SVTORANGE]

LMAO the issue has been resolved

I took the door apart to find the motor was disconnected GO FIGURE!

Thansk for the help all.

I did notice the power door lock actuator needs to be replace there is a PIN that is broken off the top:nonono:

 

[scottL]

I did notice the power door lock actuator needs to be replace there is a PIN that is broken off the top:nonono:

$54.99 for a new one here & there's an instructional video link at the bottom: Mustang Door Lock Actuator Kit (79-93) - LatemodelRestoration.com
I wonder where Tony@LRS is?:burnout:

 

[SVTORANGE]

Appreciate the information:beer:

 

[Silverfox92]

Late model has everything you need.

 

[SVTORANGE]

I am seeing that as I just ordered the door lock kit

 

[nsolimini]

I ordered two locks from there and they are too damn wimpy to push the lock up or down. Just be weary for aftermarket locks. I still have the two of mine sitting on my bench and I just unlock or lock the car by hand now.

 

[SVTORANGE]

I ordered two locks from there and they are too damn wimpy to push the lock up or down. Just be weary for aftermarket locks. I still have the two of mine sitting on my bench and I just unlock or lock the car by hand now.

I so hope that is not the case for me as this is the first heard of a product from them not working up to par :nonono: