POST UP YOUR LOWERED 2013's!!!

McFarlandd

Founder Of Southern Ohio Streets Cars
Established Member
Joined
Aug 12, 2013
Messages
153
Location
Ohio
Eibach Sportlines.



0c2f0edc6392bf435a6e0ed08d3c7ad8.jpg
c66725a9e3e1dada506889027ef71cb7.jpg
8d83fade0372c3acc5b4ea7175d220f8.jpg
 

fuelforfire87

Active Member
Established Member
Joined
May 7, 2015
Messages
625
Location
IL
My Ride with Eibach Pro-kit springs, eibach shocks and struts, 18" CF-5 wheels with 305/40 NT555R and 255/45 NT555 G2 tires
20140830_133534.jpg
20160702_154315.jpg


20160702_154340.jpg


20160702_154322.jpg
 

Rosco3

Member
Established Member
Joined
Mar 5, 2017
Messages
74
Got all my spring/tax rebate updates done. Eibach pro system plus kit, bmr LCAs with relocation brackets, bmr panhard bar, Steeda tri-ax shifter & trans mount bushing insert, RP syncromax & painted coil covers. I know a lot of people don't like to use them but the camber adjustment bolts got my car back within spec. Maybe will upgrade to C & C plates in the future. Next is a tune. I am happy with how it turned out. I don't know if it's because it's lower to the ground making it echo more, but my car seems louder now.
06cfc04bcdff7412f67683a5f01f7fa2.png
8cbf377efd029257a3966ca4b275c39c.png
2cc0fa2a88d5a5b842177c122b84c19b.jpg
114575b29760540f91ba196f70cfa4a1.jpg



Sent from my iPhone using the svtperformance.com mobile app
 

PaxtonShelby

iamdrab
Established Member
Joined
Nov 16, 2010
Messages
5,434
Location
Pittsburgh, PA
image.png
2014 with Koni yellow coil overs - 450 lb fronts & 250 rears - BMR watts link, relo brackets and LCA's, vorshlag CC plates. Ride and handling is amazing with much more spring rate than what lowering springs offer. Adjustable ride height is needed here with PA roads.
 

Skrapmetal

Active Member
Established Member
Joined
May 13, 2006
Messages
2,950
Location
IA
Installed AST 4150 coilovers with f550#/r250# Hyperco springs and Ground Control camber plates this week. Snagged 'em off the market here with low miles.

I am going to swap the rear springs out for the same rate but 1" longer, the ride height is pretty much maxed in this pic. My goal is a half inch of rake.

The ride quality is amazing compared to the Steeda Boss springs I had on it, but it probably is as much the dampers as it is the springs.

image1 (9).JPG
 

Bad V2

Well-Known Member
Established Member
Joined
Jul 2, 2018
Messages
218
Location
Las Vegas
New here. 2013 GT/CS 6,XXX miles. ST XTA coilovers, UMI adj. panhard,20X10.5 and 20X9 on 295s and 255s. Just a cruiser.....
f201a185bb36ffa06d6df5d740011f4c.jpg

bd368dcfc13e6638cc0d4a14eae42bdf.jpg



Sent from my iPhone using Tapatalk
 

matt5058

Active Member
Established Member
Joined
Jul 9, 2014
Messages
445
Location
VA
IMG-8218.JPG
IMG-8220.JPG
DSC_8931.JPG
IMG-2186.JPG


Assuming 2014s are allowed, and not just 2013s :cool: - here's mine. It's a base GT but I added the track pack wheels. Suspension setup is Koni Orange struts and shocks, front springs are Roush (0.5"-1"drop approximately), rear springs are SR Performance (1.5" drop). I also have J&M caster camber plates. Front struts/springs, CC plates, and alignment were done by JPC in Maryland. I'm quite happy with the way it sits visually and the combination has proven pretty practical even for driving on the sometimes terrible roads in DC/Maryland/Northern Virginia.
 

Users who are viewing this thread



Top