polished cat back and new shroud cover for the gas tank

MR.SCOOPINATOR

Active Member
Established Member
Joined
Apr 22, 2007
Messages
2,189
Location
NONEYA
Well i wanna thank two peolpe , tims97svt for the advise on taking the dam shroud off and a inspiration hats off to 04 sleeper for setting the standard on polishing the exhaust. My looks nothing like 04 sleepers , but i worked with what i had and it looks a hell of alot better then before.
6401194016_large.jpg
Excuse the ding in the center on the left , it was there when i bought the car. As for doing the rest nobody sees past the exhaust behind the tank anyways . :beer:
catbackexhaustcleaninng002.jpg
THANKS FOR LOOKING..
 

svt4.6snake

The weather man said theres a light chance of snow
Established Member
Joined
Jul 25, 2010
Messages
157
Location
Natomas
looks really great!!!! was this done at home or shop? if at home can you give me some direction. thanks in advance
 

MR.SCOOPINATOR

Active Member
Established Member
Joined
Apr 22, 2007
Messages
2,189
Location
NONEYA
i did mine at home with the help of a polish wheel and a lot of elbow grease. and about 6 hours of time. best of luck..
 
Last edited:

whammy91

New Member
Established Member
Joined
Nov 27, 2008
Messages
487
Location
Los Angeles, CA
whats the order in sand paper?
cause i heard you use 220 grit then 400 grit then 800grit and so on?
whats the actule steps in order?
and it looks awsome...
 

MR.SCOOPINATOR

Active Member
Established Member
Joined
Apr 22, 2007
Messages
2,189
Location
NONEYA
thanks for the compliments people .. jr i go back and forth about the wing, lol who knows time will tell. have you got thoses tires on the rims yet?
 

03cobra#694

I Have LL’s Hammer
Super Moderator
Joined
Aug 12, 2008
Messages
54,064
Location
SW FL.

03 DSG Snake

Unknown Cyborg
Established Member
Joined
Nov 3, 2002
Messages
20,897
Location
CA
POOOOOOOOOOOOOOOOOOOOOTAAAAAAAAAAAAAAAAAAAAAAAAAAAAANG


Why did you change the gas tank cover? Was yours scratched? I need to swap mine for that reason.

Does the tank and cover come down together?


TOOT IT AND BOOT IT. :pepper:
 

MR.SCOOPINATOR

Active Member
Established Member
Joined
Apr 22, 2007
Messages
2,189
Location
NONEYA
mine was burned on the back side of the shroud due to the exhaust being to close from the last owner. Very easy to change , the only prob was the bolt behind the exhaust on the right hand side, and yes they both come down together Make sure u take the gas tank all the way down to empty. Then take two jack stands place them on both sides of the tank. thats all u have to do. very easy. You might want to jack it up on the passenger side so u can see the hole for the bolt behind the exhaust. best of luck Ron...
 
Last edited:

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
97,646
Location
Cheshire, CT
Gotta love polished pipes. They look so much better. Nice shroud cover, too!
 

Users who are viewing this thread



Top