Paxton Novi 2000 Head unit and Brackets

ryan4887

Member
Established Member
Joined
Jan 21, 2012
Messages
306
Location
phoenix, Arizona
For sale I have a Paxton Novi 2000 with 5k miles at the very most. I really think its a lot less but want to be conservative on the mileage. The brackets/coil brackets were just made from Aluminum at a machine shop based directly on Paxton plans. They're brand new just used for mock-up. Comes with hardware and instruction manual. My only reason for selling is I decided to go turbo. IT IS NOT THE COMPLETE KIT. Its just the brackets for the 96-98 Cobra and the Novi 2000 Head unit. Just the head unit retails for $2500. I will do $1500 or reasonable offer for the brackets and Novi. May split up depending on interest. Feel free to call/text with any questions 623-341-7425 my name is Ryan
20190927_212158.jpg
20190927_212206.jpg
20190927_212224.jpg
20190927_212235.jpg
20191005_105718.jpg
20191005_105723.jpg
20191005_105729.jpg
20191010_084101.jpg
 

96dreamer

Well-Known Member
Established Member
Joined
Feb 22, 2007
Messages
2,240
Location
St.Louis
Will the bracket fit a Vortech v1?

Sent from my Pixel 3 XL using Tapatalk
These brackets will only fit a Novi 1000 or 2000.
I may be interested in the head unit. Supposed to be going to look at a local one Sunday first though.

In the third picture next to what looks like rub marks from a pulley is that a crack coming from the bolt hole or just a scratch or hair or something. Would you be willing to pull the volute off to show that there hasn't been any touch down of the impeller? How about removing the front cover to show the gears are in good shape?


Another random question. Were the spacers designed for the 6 rib pullies in all the pictures? Reason I ask is I mad mine from scratch as well for an 8 rib with nothing to really base them off of.
 

ryan4887

Member
Established Member
Joined
Jan 21, 2012
Messages
306
Location
phoenix, Arizona
These brackets will only fit a Novi 1000 or 2000.
I may be interested in the head unit. Supposed to be going to look at a local one Sunday first though.

In the third picture next to what looks like rub marks from a pulley is that a crack coming from the bolt hole or just a scratch or hair or something. Would you be willing to pull the volute off to show that there hasn't been any touch down of the impeller? How about removing the front cover to show the gears are in good shape?


Another random question. Were the spacers designed for the 6 rib pullies in all the pictures? Reason I ask is I mad mine from scratch as well for an 8 rib with nothing to really base them off of.

As far as the marks go I believe theyre machining/scratches. There are no gouges at all and absolutely no cracks. I can absolutely remove the volute and send you photos, the impeller is in great shape. As far as the rear cover I do not want to break the factory safety wire or the gasket. I hope you understand there. If still interested you should text me, I will be far more prompt on returning messages. Thanks
 

Users who are viewing this thread



Top