• Welcome to SVTPerformance!
  1. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Need a few things,

    1) Intake hat to lower intake bolts (01 cobra)

    2) Steering rack bolts/nuts (01 cobra)

    3) Fuel tank filler gasket (the one on the side of the tank that the filler hose goes through)

    4) and for shits and giggles, a Boss50 modular block (M-6010-BOSS50)

    5) Coil cover bolts

    6) Blower resistor (not my picture but this is what I need)
    IMAG0074_zpsf45cf586.jpg

    Thanks!

    Jason
     
    Last edited: Jan 11, 2015
  2. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    1) Intake hat to lower intake bolts (01 cobra)-By chance do you have a quanity on these? There are long bolts, a stud (or studs), and some smaller bolts. My catalog does not tell me how many of each are needed.

    2) Steering rack bolts/nuts (01 cobra) bolts are no longer available, nuts $1.35 ea

    3) Fuel tank filler gasket (the one on the side of the tank that the filler hose goes through) $15.03

    4) and for shits and giggles, a Boss50 modular block (M-6010-BOSS50) $1210 :)

    5) Coil cover bolts $.42 EA

    6) Blower resistor (not my picture but this is what I need) $23.06

    Thanks
    Mike R
     
  3. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Mike,

    I'll take the fuel filler gasket, (4) coil cover bolts, the blower resistor, and 8 of those stupid oil seals in the spark plug tubes. Let me know how to send payment.

    Jason
     
    Last edited: Jan 18, 2015
  4. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    Just PM me your info, and we'll go from there :beer:

    Or just give me a call tomorrow. I'll be in the office from 10-6 am central.

    Thanks
    Mike
     
  5. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Hey guys,

    I finally got around to installing the fan resistor I received and I'm not sure it is the right one...maybe you can take a look and let me know.

    This is the one I needed

    IMAG0072.jpg

    and this is the one I received

    100891.jpg

    I'll also need an upper radiator hose for an 2001 Cobra, it appears to be P/N# F7ZZ-8260-AA but if you could double check that would be awesome.

    Jason
    313-477-9747
     
    Last edited: Jun 25, 2015
  6. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    Are there any numbers on the old resistor? Ford has changed these a few times over the years.

    And yes, that is the correct radiator hose.

    Thanks!
    Mike R
     
  7. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    I no longer have the old part. I'll see if I can dig up a part number.
     
  8. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    Does it physically bolt in and the connector the same? If so, this should be the correct one. Is there a stamping number on the part? We could double check the correct part is in the box.

    Thanks
    Mike R
     
  9. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    Does it physically bolt in and the connector the same? If so, this should be the correct one. Is there a stamping number on the part? We could double check the correct part is in the box.

    Thanks
    Mike R
     
  10. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    I've looked high and low for that part number and I can't find it anywhere! I can tell you that it does not use the same connector as the piece that you sent me. I'll keep looking for a part number, are we dead in the water until I can find that number?
     
  11. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Had a guy pull his and take a pic of the part number, looks like it is 1R3Z-8L603-AA
     
  12. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    The 8L603 is the resistor for the cooling fan. I'm guessing that's the one you are after? It didn't occur to me before how the resistor in the picture looks awfully big to be a blower motor resistor :)
     
  13. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Yes Sir, that is the one I'm after.
     
  14. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
  15. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Can I return the other resistor for credit towards the new one? It is still in the original box
     
  16. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    Yes, no problem :)
     
  17. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Ok, can you post up where I need to mail it back to?
     
  18. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    I guess I should have mentioned that :bash:

    Autonation Ford
    attn Mike R-Parts Dept
    1493 East County Road E
    White Bear Lake, MN 55110

    Please be sure to include a copy of your invoice, or at least something with your name and number. I'd be happy to give you a call once it arrives back at our place, and we can get an exchange going for the other resistor.
     
  19. stradt03

    stradt03 Active Member Established Member

    Messages:
    1,298
    Joined:
    Nov 13, 2000
    Location:
    North Carolina
    Package on the way back to you guys! Thanks for working with me on this, I didn't have an invoice but I included my contact information. I will probably need a new clutch cable as well, can you get me a price on that?

    Jason
     
  20. FORDSVTPARTS

    FORDSVTPARTS Authorized Vendor Authorized Vendor

    Messages:
    8,790
    Joined:
    Sep 8, 2004
    Location:
    MINNESOTA
    No problem! $71.62 for the new clutch cable, XR3Z-7535-CA

    Thanks!
     

Share This Page