Parting out a complete eaton swap

rockthemullet

Member
Established Member
Joined
Apr 22, 2007
Messages
981
Location
SE, MI
Car is running and driving, I'm just going in a different direction now.

UPDATED WITH PRICES. Prices are reasonable as is but they're OBO. If you find it cheaper elsewhere, let me know and maybe we can work out a deal. Prices are before paypal fees and shipping. Bundle several pieces together and I'm willing to work some deals.

The FULL kit is also available just so I don't have to bother with all these separate parts. Originally, I was going to keep the stock lower but if you want the full kit, I can do 2700 plus fees and shipping... saves over a thousand.

-Steigi stage 4 ported blower with matching elbow - 600

IMG_20130413_221809_468_zps25a96137.gif


IMG_20130413_221835_912_zps4f28b3ef.gif


aaa3e43f-fe91-4f6e-90a7-157e126854e0_zps4f0ca2e0.gif


IMG_20130413_221914_794_zpsf13aae0b.gif



-stock tb - 150

-throttle and cruise cables - 125

-39# injectors - 200

-c&l upgraded 95mm mass air with stock intake tube and filter - 150

-alternator, pigtail, and brackets - 250

-power steering lower pressure hose (the only one that's different, brand new) - 30

-power steering reservoir bracket - 120

-billetflow 2.93 upper pulley (used) and 3.65 upper pulley (brand new), one goes with the blower - 50

-wrinkle black valve covers - 250

-wrinkle black front cover with all pulleys and tensioner - 400

-pulley bridge with all pulleys and tensioner - 200

-intercooler pump and bracket with pigtail - 150

-fluidyne heat exchanger - 200

-all heat exchanger brackets and all lines (small upper brackets are homemade... not visible, and the long line running behind the heat exchanger was cut in half with a hose spliced in) - 200

-canton sc fluid tank - 100

-coolant crossover tube with upper radiator hose (brand new) - 100

-oil cooler assembly - 150

-blower crank pulley and cage - 150

-accessory crank pulley - not sure yet, may be damaged

-stock water pump, brand new - 30

It's a complete kit, you guys know what comes with. The only thing that's not available is the lower intake/intercooler.

Everything is still on the car, I can take pics as I disassemble the car.

2013-01-31_23-57-34_59_zps60c92d0b.gif
 
Last edited:

rockthemullet

Member
Established Member
Joined
Apr 22, 2007
Messages
981
Location
SE, MI
Are valve covers painted or powder coated?

Powdercoated. It's likely I'll be selling the front cover and valve covers as a set

I'm still looking at comparables for individual parts, I'll be updating today. I kinda jumped the gun last night, didn't expect all the interest on 3 different sites
 

rockthemullet

Member
Established Member
Joined
Apr 22, 2007
Messages
981
Location
SE, MI
Started tearing into the car

IMG_20130408_193247_265_zps4ea17cf4.gif


I'll take pictures as I clean things up. Right now the blower assembly, injectors, coolant crossover, and valve covers are good to go... it's likely I'll have the rest off this weekend.

I actually have two sets of wrinkle valve covers... the ones on the green car and then a set that have not been on a motor yet. I'm willing to sell both sets, this set would be 300 OBO

IMG_20130410_220432_036_zpsb322f23d.gif


IMG_20130410_220425_678_zps44e6ff0a.gif




Everything is OBO, I'll be very motivated to make deals once everything is ready to go. Shoot me some interest, worst I can say is no
 

_Hammer

New Member
Established Member
Joined
Feb 8, 2013
Messages
11
Location
Central Ks
For my sake, I hope you still have everything in a couple weeks... Id take it all off your hands

Eaton swap that is
 

rockthemullet

Member
Established Member
Joined
Apr 22, 2007
Messages
981
Location
SE, MI
For my sake, I hope you still have everything in a couple weeks... Id take it all off your hands

Eaton swap that is

I've had some interest on the kit and plenty of interest on individual parts but no one has thrown me cash yet, you could get lucky!
 

rockthemullet

Member
Established Member
Joined
Apr 22, 2007
Messages
981
Location
SE, MI
why was there a hose spliced into the heat exchanger lines? could you post a picture of it?

The PO of the kit couldn't find a box big enough so he cut the tube. Not exactly the ideal solution to shipping, but it works just fine as is. I'll try and take a picture soon
 

rockthemullet

Member
Established Member
Joined
Apr 22, 2007
Messages
981
Location
SE, MI
also, do the homemade brackets still incorporate the anti-shock rubber bumbers for mounting the heat exchanger?

The brackets are unrelated to the rubber bumper section. The homemade ones go from the bracket assembly to the front of the crash beam. I'll have to get pics up here soon
 

Users who are viewing this thread



Top