Ken,
I received the Panhard bar and rear coilovers assemblies. Thanks again. Good doing business with you.
Jeff
I received the Panhard bar and rear coilovers assemblies. Thanks again. Good doing business with you.
Jeff
Parting out 2003 GT convertible
- Thread starter Ken03KBGTvert
- Start date
Oops
Last edited:
Prices...
Entire Griggs SLA front suspension-$2500
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$275
Weld drag racing wheels/tirescenter caps/lugnuts-$600
4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all
Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2500
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.
Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2500
Canton oil pan/windage tray-$150
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
Stock 4.6 heads-$350
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
Fluidyne Radiator with custom fan/fan shroud and overflow-$250
Oil cooler, oil filter adapter-$100
Front brake cooling ducts with bracket that mounts to front spindles-$75
Corbeau racing harnesses driver/passenger-$150
Truetrac differential-$200
DIFFERENTIAL SOLD
3.73 rear gear-$75
3.73 GEAR SOLD
PA 130amp alternator-$125
ARP headstuds-$75
Rollbar video camera mount-$50
MAFia extender$75 AeroForce
Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$100
N2MB box-$100
8.8 rear end with axle tubes welded-$250
REAR ENDSOLD
Strange axles-$150
AXLES SOLD
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Entire Griggs SLA front suspension-$2500
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$275
Weld drag racing wheels/tirescenter caps/lugnuts-$600
4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all
Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2500
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.
Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2500
Canton oil pan/windage tray-$150
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
Stock 4.6 heads-$350
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
Fluidyne Radiator with custom fan/fan shroud and overflow-$250
Oil cooler, oil filter adapter-$100
Front brake cooling ducts with bracket that mounts to front spindles-$75
Corbeau racing harnesses driver/passenger-$150
Truetrac differential-$200
DIFFERENTIAL SOLD
3.73 rear gear-$75
3.73 GEAR SOLD
PA 130amp alternator-$125
ARP headstuds-$75
Rollbar video camera mount-$50
MAFia extender$75 AeroForce
Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$100
N2MB box-$100
8.8 rear end with axle tubes welded-$250
REAR ENDSOLD
Strange axles-$150
AXLES SOLD
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Last edited:
NewEdgeGT2001
New Member
do you still have the rear calipers and do they work 100%?
I have a set of rear calipers, shields, and rotors from a GT.
- - - Updated - - -
Looking for the radio antenna base off passenger fender. Part # XR3F-18936-AA
Prices...
Entire Griggs SLA front suspension-$2500
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$275
Weld drag racing wheels/tirescenter caps/lugnuts-$600
4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all
Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2500
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.
TANK/HAT/PUMPS SOLD
Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2500
Canton oil pan/windage tray-$150
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
Stock 4.6 heads-$350
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE
Fluidyne Radiator with custom fan/fan shroud and overflow-$250
Oil cooler, oil filter adapter-$100
Front brake cooling ducts with bracket that mounts to front spindles-$75
Corbeau racing harnesses driver/passenger-$150
Truetrac differential-$200
DIFFERENTIAL SOLD
3.73 rear gear-$75
3.73 GEAR SOLD
PA 130amp alternator-$125
ARP headstuds-$75
SOLD
Rollbar video camera mount-$50
MAFia extender$75 AeroForce
Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$100
N2MB box-$100
8.8 rear end with axle tubes welded-$250
REAR END SOLD
Strange axles-$150
AXLES SOLD
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$50
FORE fuel rails-$120
FORE triple pump fuel hat and 3into1 block-$250
Entire Griggs SLA front suspension-$2500
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$275
Weld drag racing wheels/tirescenter caps/lugnuts-$600
4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all
Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2500
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.
TANK/HAT/PUMPS SOLD
Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2500
Canton oil pan/windage tray-$150
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
Stock 4.6 heads-$350
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE
Fluidyne Radiator with custom fan/fan shroud and overflow-$250
Oil cooler, oil filter adapter-$100
Front brake cooling ducts with bracket that mounts to front spindles-$75
Corbeau racing harnesses driver/passenger-$150
Truetrac differential-$200
DIFFERENTIAL SOLD
3.73 rear gear-$75
3.73 GEAR SOLD
PA 130amp alternator-$125
ARP headstuds-$75
SOLD
Rollbar video camera mount-$50
MAFia extender$75 AeroForce
Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$100
N2MB box-$100
8.8 rear end with axle tubes welded-$250
REAR END SOLD
Strange axles-$150
AXLES SOLD
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$50
FORE fuel rails-$120
FORE triple pump fuel hat and 3into1 block-$250
Last edited:
RR a/c delete pulley $175 shipped
GI JOE Gripper Plate with instructions. Never installed. $100 shipped
MGW shifter for 3650 transmission $150 shipped
GI JOE Gripper Plate with instructions. Never installed. $100 shipped
MGW shifter for 3650 transmission $150 shipped
Last edited:
NEW PRICES...
Entire Griggs SLA front suspension-$2000+SHIPPING
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE $150 SHIPPED
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$250 SHIPPED
Weld drag racing wheels/tirescenter caps/lugnuts-$500+SHIPPING
4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all
WHEELS/TIRES SOLD
Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2000+SHIPPING
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.
TANK/HAT/PUMPS SOLD
Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2000+SHIPPING
Canton oil pan/windage tray-$150 SHIPPED
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
SPRINGS SOLD...CAMS STILL AVAILABLE $200 SHIPPED
Stock 4.6 heads-$300+SHIPPING
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE $$150+SHIPPING
Fluidyne Radiator with custom fan/fan shroud and overflow-$200+SHIPPING
Oil cooler, oil filter adapter-$100 SHIPPED
Front brake cooling ducts with bracket that mounts to front spindles-$75 SHIPPED
Corbeau racing harnesses driver/passenger-$125 SHIPPED
Truetrac differential-$200
DIFFERENTIAL SOLD
3.73 rear gear-$75
3.73 GEAR SOLD
PA 130amp alternator-$115 SHIPPED
ARP headstuds-$75
SOLD
Rollbar video camera mount-$45 SHIPPED
MAFia extender-$60 shipped
MAFIA SOLD
Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$90 SHIPPED
N2MB box-$90 SHIPPED
8.8 rear end with axle tubes welded-$250
REAR END SOLD
Strange axles-$150
AXLES SOLD
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$60 SHIPPED
FORE fuel rails-$120 SHIPPED
FORE triple pump fuel hat and 3into1 block-$240 SHIPPED
Melling billet oil pump-$200
OIL PUMP SOLD
Entire Griggs SLA front suspension-$2000+SHIPPING
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE $150 SHIPPED
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$250 SHIPPED
Weld drag racing wheels/tirescenter caps/lugnuts-$500+SHIPPING
4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all
WHEELS/TIRES SOLD
Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2000+SHIPPING
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.
TANK/HAT/PUMPS SOLD
Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2000+SHIPPING
Canton oil pan/windage tray-$150 SHIPPED
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
SPRINGS SOLD...CAMS STILL AVAILABLE $200 SHIPPED
Stock 4.6 heads-$300+SHIPPING
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE $$150+SHIPPING
Fluidyne Radiator with custom fan/fan shroud and overflow-$200+SHIPPING
Oil cooler, oil filter adapter-$100 SHIPPED
Front brake cooling ducts with bracket that mounts to front spindles-$75 SHIPPED
Corbeau racing harnesses driver/passenger-$125 SHIPPED
Truetrac differential-$200
DIFFERENTIAL SOLD
3.73 rear gear-$75
3.73 GEAR SOLD
PA 130amp alternator-$115 SHIPPED
ARP headstuds-$75
SOLD
Rollbar video camera mount-$45 SHIPPED
MAFia extender-$60 shipped
MAFIA SOLD
Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$90 SHIPPED
N2MB box-$90 SHIPPED
8.8 rear end with axle tubes welded-$250
REAR END SOLD
Strange axles-$150
AXLES SOLD
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$60 SHIPPED
FORE fuel rails-$120 SHIPPED
FORE triple pump fuel hat and 3into1 block-$240 SHIPPED
Melling billet oil pump-$200
OIL PUMP SOLD
Last edited:
Are you selling any of the convertible top parts? I need the hydraulic lifters if they are in good working order.
Ill take the entire top. Frame cylnders and pump.
How much for the mgw shifter shipped to 23513
UPDATED...
Entire Griggs SLA front suspension-$2000+SHIPPING
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE $150 SHIPPED
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$250 SHIPPED
Weld drag racing wheels/tirescenter caps/lugnuts-$500+SHIPPING
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2000+SHIPPING
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 3 differnet size 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
Canton oil pan/windage tray-$150 SHIPPED
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
SPRINGS SOLD...CAMS STILL AVAILABLE $200 SHIPPED
Stock 4.6 heads-$300+SHIPPING
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE $$150+SHIPPING
Fluidyne Radiator with custom fan/fan shroud and overflow-$200+SHIPPING
Oil cooler, oil filter adapter-$100 SHIPPED
Front brake cooling ducts with bracket that mounts to front spindles-$75 SHIPPED
Corbeau racing harnesses driver/passenger-$125 SHIPPED
PA 130amp alternator-$115 SHIPPED
Rollbar video camera mount-$45 SHIPPED
Autometer Boost/FP gauge-$90 SHIPPED
N2MB box with instructions-$90 SHIPPED
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$60 SHIPPED
FORE fuel rails-$120 SHIPPED
FORE triple pump fuel hat and 3into1 block-$240 SHIPPED
RR a/c delete pulley $175 shipped
GI JOE Gripper Plate with instructions. Never installed. $100 shipped
MGW shifter for 3650 transmission $150 shipped
Line Lock -$75 SHIPPED
Entire Griggs SLA front suspension-$2000+SHIPPING
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE $150 SHIPPED
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$250 SHIPPED
Weld drag racing wheels/tirescenter caps/lugnuts-$500+SHIPPING
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2000+SHIPPING
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 3 differnet size 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
Canton oil pan/windage tray-$150 SHIPPED
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
SPRINGS SOLD...CAMS STILL AVAILABLE $200 SHIPPED
Stock 4.6 heads-$300+SHIPPING
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE $$150+SHIPPING
Fluidyne Radiator with custom fan/fan shroud and overflow-$200+SHIPPING
Oil cooler, oil filter adapter-$100 SHIPPED
Front brake cooling ducts with bracket that mounts to front spindles-$75 SHIPPED
Corbeau racing harnesses driver/passenger-$125 SHIPPED
PA 130amp alternator-$115 SHIPPED
Rollbar video camera mount-$45 SHIPPED
Autometer Boost/FP gauge-$90 SHIPPED
N2MB box with instructions-$90 SHIPPED
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$60 SHIPPED
FORE fuel rails-$120 SHIPPED
FORE triple pump fuel hat and 3into1 block-$240 SHIPPED
RR a/c delete pulley $175 shipped
GI JOE Gripper Plate with instructions. Never installed. $100 shipped
MGW shifter for 3650 transmission $150 shipped
Line Lock -$75 SHIPPED
That disappeared the day after I put it on craigslist. Sorry.
$150 shipped
UPDATED...
Entire Griggs SLA front suspension-$2000+SHIPPING
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE $150 SHIPPED
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$250 SHIPPED
Weld drag racing wheels/tirescenter caps/lugnuts-$500+SHIPPING
Canton oil pan/windage tray-$150 SHIPPED
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
SPRINGS SOLD...CAMS STILL AVAILABLE $200 SHIPPED
Stock 4.6 heads-$300+SHIPPING
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE $$150+SHIPPING
Fluidyne Radiator with custom fan/fan shroud and overflow-$200+SHIPPING
Oil cooler, oil filter adapter-$100 SHIPPED
Front brake cooling ducts with bracket that mounts to front spindles-$75 SHIPPED
Corbeau racing harnesses driver/passenger-$125 SHIPPED
PA 130amp alternator-$115 SHIPPED
Rollbar video camera mount-$45 SHIPPED
Autometer Boost/FP gauge-$90 SHIPPED
N2MB box with instructions-$90 SHIPPED
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$60 SHIPPED
FORE triple pump fuel hat and 3into1 block-$240 SHIPPED
RR a/c delete pulley $175 shipped
GI JOE Gripper Plate with instructions. Never installed. $100 shipped
Line Lock -$75 SHIPPED
Entire Griggs SLA front suspension-$2000+SHIPPING
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings
Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE $150 SHIPPED
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$250 SHIPPED
Weld drag racing wheels/tirescenter caps/lugnuts-$500+SHIPPING
Canton oil pan/windage tray-$150 SHIPPED
Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300
SPRINGS SOLD...CAMS STILL AVAILABLE $200 SHIPPED
Stock 4.6 heads-$300+SHIPPING
MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all
HEADERS/PROCHAMBER SOLD....FLOWMASTER MUFFLERS STILL AVAILABLE $$150+SHIPPING
Fluidyne Radiator with custom fan/fan shroud and overflow-$200+SHIPPING
Oil cooler, oil filter adapter-$100 SHIPPED
Front brake cooling ducts with bracket that mounts to front spindles-$75 SHIPPED
Corbeau racing harnesses driver/passenger-$125 SHIPPED
PA 130amp alternator-$115 SHIPPED
Rollbar video camera mount-$45 SHIPPED
Autometer Boost/FP gauge-$90 SHIPPED
N2MB box with instructions-$90 SHIPPED
Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SPEC FLYWHEEL STILL AVAILABLE
Stewart water pump-$60 SHIPPED
FORE triple pump fuel hat and 3into1 block-$240 SHIPPED
RR a/c delete pulley $175 shipped
GI JOE Gripper Plate with instructions. Never installed. $100 shipped
Line Lock -$75 SHIPPED
Last edited:
I am very very interested in you parting me out the black convertible top (full assembly). I am willing to meet you where you live. Give me a call or shoot me a text at 434-401-4515.
Users who are viewing this thread
