Parting out 2003 GT convertible

[Ken03KBGTvert]

Anyone interested in some cool looking brakes for your GT? Baer 2-piece rotors front and rear. Cobra calipers front and rear, SS brake lines for the front, rear brake bracket kit to run the Cobra brakes on the rear. All this cost me roughly $1500 when I bought it. I'll sell it all for $700 (+shipping). That's less than the cost of just the Baer rotors.

 

[Ken03KBGTvert]

Cloth convertible top still looks great. Cost me $650 plus $500 to have it installed. I do not know how to remove it. If you do, $250 and it's yours. Come take it off.

 

[Ken03KBGTvert]

Prices...

Entire Griggs SLA front suspension-$2500
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings

Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms

Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$275

Read more at: http://www.modularfords.com/threads/225121-2003-Mustang-GT-convertible-parting-out

Weld drag racing wheels/tirescenter caps/lugnuts-$600

4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all

Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000

KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2500
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.

Cobra F/R brakes with Baer two piece rotors-$700

Aluminum driveshaft-$150

Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.

Corbeau FX1 pro seats-$300

Cervinis cowl hood with hood pins-$250

Proline Performance built Teksid aluminum short block-$2500

Canton oil pan/windage tray-$150

Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300

Stock 4.6 heads-$350

MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all

Fluidyne Radiator with custom fan/fan shroud and overflow-$250

Oil cooler, oil filter adapter-$100

Front brake cooling ducts with bracket that mounts to front spindles-$75

Corbeau racing harnesses driver/passenger-$150

Truetrac rearend-$200

3.73 rear gear-$75

PA 130amp alternator-$125

ARP headstuds-$75

Rollbar video camera mount-$50

MAFia extender$75 AeroForce

Interceptor Dual Gauge-$200

InnovateXD-16/LC-1-$175

Speed of Sound 2-gauge pod w/ Raptor shift light-$100

Autometer Boost/FP gauge-$100

N2MB box-$100

8.8 rear end with axle tubes welded-$250

Strange axles-$150

Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300

There's more stuff but that is a good bit. Pictures as requested. Shipping depends on size/agreed upon price. If you buy enough and live close enough, I'll meet you half way.

Ken

 

[streetpilot]

Ken,

I just need the price on the Koni rear shock with coilover kit and your PayPal.

Jeff

 

[Dalton_ray]

Can you PM me the exhaust hanger price? Need the one that hangs from the body where the muffler would be. if you have questions on what i'm talking about text me 620-474-5705 thank you.

 

[Dbovine]

Tires on them too or just wheels?

With Tires on them

 

[Ken03KBGTvert]

 

[Ken03KBGTvert]

With Tires on them

Nitto NT-01

 

[stradt03]

How about the two long bolts and nuts that mount the steering rack to the k-member?

 

[Ken03KBGTvert]

With Tires on them

Sorry, thought you said WHAT tires, not WITH tires. $200. Where are you? Shipping might be expensive...

Ken

 

[Ken03KBGTvert]

How about the two long bolts and nuts that mount the steering rack to the k-member?

Are those the factory bolts that are in the picture above?

 

[stradt03]

Are those the factory bolts that are in the picture above?

yessir, they go through the blue aluminum steering rack bushings that you have in those two pictures above. I don't see the bolts and nuts but that is where they would go.

 

[BlackSaleen1999]

Pics gauges please to 6105631401, thanks.

 

[vipergts281]

How much for the tail lights shipped to 19380?

And I'd love to see a better pic, please. They seem to be slightly tinted??

 

[Ken03KBGTvert]

I've tried to message people individually but in case I missed anyone...

I got stupid sick yesterday morning at work, had to have someone come relieve me on my route, and I've been in bed or in the bathroom since. I'm feeling a little better tonight and hope to return to work tomorrow, as well as get to Lowes to get more tape (LOTS OF TAPE) and to UPS to ship stuff people have already bought. Everything is off the car except for some of the gauges, WOT box, and the block is still sitting on the Kmember bolted to the car like in the picture above.

Lots of things are already sold or serious interest in them. I will update the list as they are actually out of the garage.

Thank you
Ken

 

[Ken03KBGTvert]

Prices...

Entire Griggs SLA front suspension-$2500
K-member, upper/lower control arms, coilover kit, Koni shocks, SLA tower set, adj. sway bar, aluminum rack bushings

Entire Griggs rear suspension-$1500
HD torque arm, pandhard bar, coilover kit, Koni shocks, TA rear differential cover, lower control arms
PANHARD BAR, TORQUE ARM, COILOVERS, KONI SHOCKS, REAR DIFFERNTIAL COVER SOLD....LOWER CONTORL ARMS STILL AVAILABLE
Griggs WC lower control arms, brand new, never installed, chromoly, not aluminum-$275

Weld drag racing wheels/tirescenter caps/lugnuts-$600

4-17x10.5, 2-17x9 black Cobra style wheels with Nitto NT-01 tires on all of them (315-275)-$500 for all

Promotion built 3650 transmission with 26-spline input shaft w/MGW shifter-$1000
TRANSMISSION SOLD....SHIFTER STILL AVAILABLE
KenneBell 2.1 intercooled with custom inlet 95% complete kit-$2500
I believe I have everything for this except a heat exchanger, mine is custom and is in the back seat. Blower, CAI, Accufab/KB big oval TB, stock reservoir, fluid pump, 60# fuel injectors, 6 and 8 rib pulleys, 8rib pulley kit available if you want to switch all pulleys over. Except A/C pulley, I have the RR A/C delete pulley.
FUEL INJECTORS SOLD
Cobra F/R brakes with Baer two piece rotors-$700
BRAKES SOLD
Aluminum driveshaft-$150
DRIVESHAFT SOLD
Cobra tank/fuel hat/pumps-$150
tank has been modified slighlty with a rollover vent and all emmission stuff eliminated, pumps may/may not work, no guarantee on them.

Corbeau FX1 pro seats-$300
SEATS SOLD
Cervinis cowl hood with hood pins-$250
HOOD SOLD
Proline Performance built Teksid aluminum short block-$2500

Canton oil pan/windage tray-$150

Comp cams/springs, custom spec by Tim Barth from MPH for a positive displacement blower like a KB-$300

Stock 4.6 heads-$350

MAC long tube headers/MAC prochamber midpipe (no cats), Flowmaster mufflers with dumps welded on-$500 for all

Fluidyne Radiator with custom fan/fan shroud and overflow-$250

Oil cooler, oil filter adapter-$100

Front brake cooling ducts with bracket that mounts to front spindles-$75

Corbeau racing harnesses driver/passenger-$150

Truetrac rearend-$200

3.73 rear gear-$75

PA 130amp alternator-$125

ARP headstuds-$75

Rollbar video camera mount-$50

MAFia extender$75 AeroForce

Interceptor Dual Gauge-$200
INTERCEPTOR SOLD
InnovateXD-16/LC-1-$175
INNOVATE WIDEBAND SOLD
Speed of Sound 2-gauge pod w/ Raptor shift light-$100
2-GAUGE POD SOLD
Autometer Boost/FP gauge-$100

N2MB box-$100

8.8 rear end with axle tubes welded-$250

Strange axles-$150

Centerforce DFX clutch/SPEC billet steel 26-spline 8-bolt flywheel-$300
CLUTCH SOLD....SOEC FLYWHEEL STILL AVAILABLE

 

[Ken03KBGTvert]

Stewart water pump-$50

FORE fuel rails-$120

FORE triple pump fuel hat and 3into1 block-$250

 

[Ken03KBGTvert]

How much for the tail lights shipped to 19380?

And I'd love to see a better pic, please. They seem to be slightly tinted??

OK, I don't know why photobucket is flipping the picture upside down when I send it to you but I tried twice. It isn't upside down on my photobucket page. Just stand on your head and look at the picture LOL

And you PMBOX is full now...

Ken

 

[MineralCobra]

Is the roll bar welded in or.bolt in ?

 

[Ken03KBGTvert]

Welded in and it would only work with someone that had the Griggs upper SFC's . It ties into them.