Parting out 1996 Cobra. Drilled/Slotted Rotors, 01 Cobra Seats, ETC

[mustangmorgue]

I am parting out a 1996 Mustang Cobra. 110k miles on the odometer, with clean title. Texas car so no rust and no body damage. Core support is very straight. Engine and transmission were not there when I purchased it.

If you are interested in any parts feel free to comment on here or message me using any of the following links.

Text/Call: 563-580-5621
Email: [email protected]

***OEM Cobra Front Bumper w/ Header Panel. $325

***OEM GT/V6 Front Bumper w/ Header Panel. $100

***OEM GT/V6 Hood w/ Liner. $100

***Wiper Cowl w/ Wiper Fluid Lines. $100

----SOLD----
Inner Fenders
Cruise Module
Seats
Pass Fender
Rotors
Rear Bumpers
Gauge Cluster
Passenger Door
Passenger Skirt
Headlights
Grille Emblem
Sway Bar
Dash Pad
Front & Rear Brake Setup (excluding rotors & pads)

 

[mustangmorgue]

Bump pictures added

 

[1bad95]

How much for the front cobra calipers, brackets and lines? Have a buddy looking for a set

 

[mustangmorgue]

How much for the front cobra calipers, brackets and lines? Have a buddy looking for a set

$350 shipped to any of the main 48 states for calipers, calipers brackets, and lines.

 

[Bardo575]

How much for the complete rear end including UCA, LCA, struts, and sway bar?

 

[mustangmorgue]

How much for the complete rear end including UCA, LCA, struts, and sway bar?

$450 complete with control arms, struts, sway bar, axles, diff, gears, etc. Brakes are sold though. However I have all the stuff to put GT brakes on the rear if interested.

 

[mustangmorgue]

Bump

 

[mustangmorgue]

bump

 

[jakesspv6]

how much for the inside door cups? everything together and not broken?

 

[vrt03cobra]

Do you still have the transmission crossmember mounts that bolt onto the frame rails?

 

[mustangmorgue]

how much for the inside door cups? everything together and not broken?

Sorry they were both broken. Check out LRM they make some nice reproduction ones.

Do you still have the transmission crossmember mounts that bolt onto the frame rails?

I do. PM me and we can talk price.

 

[96Mystic1189]

What condition is the drivers door sill in? I need a black one because mine is scratched, but I am still putting this show car together so I need one as mint as possible.

 

[95riosnake]

Would you be willing to cut a patch panel out of the passenger quarter panel? I need the whole side scoop area plus about 8" above, below and back to the wheel well including the lip. I can get you a pic with the area I need drawn on. Let me know

 

[mustangmorgue]

What condition is the drivers door sill in? I need a black one because mine is scratched, but I am still putting this show car together so I need one as mint as possible.

Sorry for the wait. The driver door isn't great. No rust and no major dents but there was an attempted break in at one point so the lock cylinder was bent and bent the metal around the lock. It could easily be straightened. Color is white and has typical ford white paint peeling issues. If interested the price is $150 fully loaded w/o lock & door panel. $85 w/o window motor, wiring, lock mechanism, and seals.

Would you be willing to cut a patch panel out of the passenger quarter panel? I need the whole side scoop area plus about 8" above, below and back to the wheel well including the lip. I can get you a pic with the area I need drawn on. Let me know

Pm replied to.

 

[Mystic289]

PM sent about a power seat motor and switch assembly. Looking for a forward/back power seat motor (gears are stripped out) and a 3 plug power seat switch. Thanks!

 

[RioRed4v]

Happen to have a driver and passenger interior door panel?

 

[Goindeafonmtx]

Take $50 for abs module?

 

[Shifty Powers]

I am very interested in both tail light harnesses. Let me know a price and shipping to 19333.

as long as they were not spliced into for sequential lights or some jazz