On3 Single Turbo Kit

5.bye

New Member
Established Member
Joined
Nov 8, 2018
Messages
16
Location
Louisiana
Fired mine up yesterday! Unbelievably quiet! Haven't driven it, just a few little revs to 4K, now I'm getting anxious, but there's a boat-load of snow on my street so it'll be a while before doing any tuning / logging. Love how quiet this is with the full exhaust set-up, probably a dream on the highway to / from the track this summer, cannot wait!

Badass man! Waiting on my motor and still have to buy a couple things, but I’m itching because I can feel it getting closer!


Sent from my iPhone using the svtperformance.com mobile app
 

jeffs

Active Member
Established Member
Joined
Apr 10, 2007
Messages
983
Location
Rock Springs Wy.
So I finally got my on3 single out to the track for some testing. I ran a 10.1 @ 136mph with all kinds of shifting problems. My tuner is in the process of fixing that. Oh and at was at 9psi and about 710hp
Damn strong for single digit boost. makes me wish I would've held off on the fancy electronic boost controller for the moment and tried the 11psi spring first, hahaha!
 

w1tchblad3

Member
Established Member
Joined
Sep 12, 2013
Messages
96
Location
Houston
I have a new engine being built right now so I'm going to see how far I can push the 76mm turbo. If i can't meet my goals of 950hp I'll upgrade the turbo.
 

PC03GT

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
2,391
Location
delaware
I have a new engine being built right now so I'm going to see how far I can push the 76mm turbo. If i can't meet my goals of 950hp I'll upgrade the turbo.
My buddy was trying to hit 1000 with that kit, but he would of ended up dropping more money into the kit with a different wastegate and I believe a better fuel system. He ended up at 912 with shitty weather
 
Last edited:

jeffs

Active Member
Established Member
Joined
Apr 10, 2007
Messages
983
Location
Rock Springs Wy.
It’s possible to make 1100whp with the 76.


Sent from my iPhone using the svtperformance.com mobile app
A friend of mine made over 800whp @15-16psi on C16 in his 76/75bmf powered fox through a 6R80. I'd guess that could've been higher 800's on E85. So I can believe 4 digit rwhp from this kit. How long has this On3 single been out for Coyote S197's?
 

w1tchblad3

Member
Established Member
Joined
Sep 12, 2013
Messages
96
Location
Houston
My new pistons
 

Attachments

  • IMG_2120.jpg
    IMG_2120.jpg
    189.6 KB · Views: 390
  • IMG_2121.jpg
    IMG_2121.jpg
    73.1 KB · Views: 409

5.bye

New Member
Established Member
Joined
Nov 8, 2018
Messages
16
Location
Louisiana
A friend of mine made over 800whp @15-16psi on C16 in his 76/75bmf powered fox through a 6R80. I'd guess that could've been higher 800's on E85. So I can believe 4 digit rwhp from this kit. How long has this On3 single been out for Coyote S197's?

This particular kit has been out since November 2017.


Sent from my iPhone using the svtperformance.com mobile app
 

5.bye

New Member
Established Member
Joined
Nov 8, 2018
Messages
16
Location
Louisiana
A friend of mine made over 800whp @15-16psi on C16 in his 76/75bmf powered fox through a 6R80. I'd guess that could've been higher 800's on E85. So I can believe 4 digit rwhp from this kit. How long has this On3 single been out for Coyote S197's?

Also, Sai Li tunes a car that is running 8.80s with the 76/75 with an MPR built non-sleeved motor and Brett Lasala built transmission. Car is a beast.


Sent from my iPhone using the svtperformance.com mobile app
 

Users who are viewing this thread



Top