Nitto d/R tire presure

topless_sn8k

New Member
Established Member
Joined
Jul 3, 2007
Messages
357
Location
So Cal
Hey all, I'm getting some Nitto D/R 335/30/18. These will be on my daily driver, what should I run for tire presure:shrug:??? and what would you suggest for the strip:shrug:???? Thanks.
 

Steeda30

Clearance Clarence
Established Member
Joined
Dec 10, 2004
Messages
3,536
Location
Houston, TX
I used to run them at 32 PSI on the street - they're 315 DR's on a 10.5" wheel. They wore in the center a good bit more than they did on the edges, so on this most recent set I've been running 28 PSI - and the wear seems to be perfect.
 

wheelhopper

Active Member
Established Member
Joined
Jul 14, 2005
Messages
6,640
Location
Southern MD
I have been using Nitto DR for the past 4 years, for street and strip in both 17" and 18" sizes. I run 25-26 psi on the street and 19psi on the drag strip. I even used them on the road coarse and they worked very well. 35 psi for that.
 

Quadcammer

4cams aren't better then1
Established Member
Joined
Nov 21, 2002
Messages
11,540
Location
jersey
right at 30.

work well for turns and straightline, but they definitely stick much better around 18 to 20psi if you plan on going for lower gear blasts.
 

Users who are viewing this thread



Top