New best today

[rw95gt]

Managed a new best today on a ok track.

1.52
6.82 at 103mph
10.60 at 133mph

Mods are:
vmp mail order tune
2.59 upper and 10% lower
dynotech headers
slicks and skinnies
adjustible upper
1 piece ds
home port


The other 2 runs of the day:
1.53
6.81 at 103mph
10.61 at 132mph

1.54
6.84 at 103mph
10.65 at 132

The da was 320'

I am trying to get the ported blower record. Im just not sure what it is. I think its a 10.49 but Im not positive thats it.

 

[burnin4]

Outstanding :beer:

 

[Quade]

Very impressive passes there man. I know IronTerp has a list of the fastest stock/ported blower cars here somewhere.

 

[cobra gt 07]

Nice

Congrats on the times and consistency. Your 60 foots at ET's are amazing close run-after-run. Do you mind me asking what slicks you are running? I am looking to pick up a set of slicks in the not too distant future.

 

[Posi]

Oh boy a home ported car that's running good! Don't forget about the nonported record of like 10.34 or 10.39. Might as well shoot for that sucker while you're at it. With how you're getting quicker and quicker maybe you'll try for that too?

 

[me32]

Thats great man. Really good for such little mods.

 

[BigDan]

Great job. :beer:

Stock heat exchanger?

 

[SVTeveN]

Stock injectors?

 

[AlanSVT]

Awesome job bro. Was hoping you would get your 10.5....Maybe next time.

 

[rw95gt]

Thanks guys. Tires are 28/10.5/15 mt stiff wall slicks. Stock heat exchanger and injectors. The only mods are listed above. Its full weight besides the race star wheels.

 

[SVTeveN]

I've seen some of your vids. Great driving and Congrats!

 

[Kimcobra]

I've seen some of your vids. Great driving and Congrats!

Ditto, man great driving and congrats on the new best time..

 

[niceguyyy01]

Oh boy a home ported car that's running good! Don't forget about the nonported record of like 10.34 or 10.39. Might as well shoot for that sucker while you're at it. With how you're getting quicker and quicker maybe you'll try for that too?

Is this sarcasm? Or do you and the OP know each other? Being new here, your statement comes off as kinda crappy. If it is not meant that way, then please accept my apologies.

I think it's nice to see people proud of what they have accomplished with some "home" work. Kudos to the OP.

 

[IronTerp]

Great job Randall! You got that beast rolling out. You've done a great job with that car with what you have done to it.

Here you go:

THE EATON SUPERCHARGER SHELBY GT500 10 SECOND CLUB

THE UNPORTED EATON CREW:
1) Jerrytubbs1...............10.39 @ 131.01 w/ 1.49 (6spd/unported)
2) MD03SVT..................10.47 @ 131.85 w/ 1.473 (6spd/unported)
3) 500DRAGPAC.............10.65 @ 130.53 w/ 1.555 (6spd/unported)
4) FS MACH 1................10.70 @ 133.80 w/ 1.58 (6spd/unported)
5) le rafiot....................10.76 @ 131.69 w/ 1.57 (6spd/unported)
6) snake500..................10.808 @ 126.84 w/ 1.57 (6spd/unported)
7) 11ride4life................10.94 @ 127.71 w/ 1.595 (6spd/unported/Nitrous)

THE PORTED EATON CREW:
1) autoliberte................10.48 @ 133.66 w/ 1.555 (6spd/Steig Port)
2) VNMOUS1.................10.54 @ 129.55 w/ 1.495 (6spd/Posi Port)
3) serickson1................10.56 @ 131.88 w/ 1.47 (6spd/Steig Port)
4) rw95gt...................10.60 @ 133.20 w/ 1.52 (6spd/Home Port)
5) quadedaddy..............10.817 @ 130.45 w/ 1.599 (6spd/Posi Port)
6) zombeast.................10.86 @ 127.86 w/ 1.74 (6spd/Posi Port)

EATON SHELBY GT500 1/4 MILE 130 MPH CLUB (Non-nitrous)
1) serickson1.................135.35 (6spd/Steig Port)
2) FS MACH 1................133.80 (6spd/unported)
3) rw95gt...................133.20 (6spd/Home Port)
4) autoliberte................133.66 (6spd/Steig Port)
5) MD03SVT..................131.85 (6spd/unported)
6) le rafiot....................131.69 (6spd/unported)
7) Jerrytubbs1...............131.01 (6spd/unported)
7) quadedaddy..............130.74 (6spd/Posi Port)
9) 500DRAGPAC.............130.53 (6spd/unported)

 

[08blkshelby]

Stock throttle body and 10.6@ 133mph! Your the man:bowdown:

 

[Darth Racer]

Thanks guys. Tires are 28/10.5/15 mt stiff wall slicks. Stock heat exchanger and injectors. The only mods are listed above. Its full weight besides the race star wheels.

You probably know my situation from other posts. You're using the stock OEM differential? Mine lasted only 8 passes. For my application, it didn't hold up well. I'm using the MT 28/x10.5x15W slicks. I may have to go drag radials if I can't find a non-spool differential that'll hold up. My car is at full weight....about 4,000 lbs with me in the car.

 

[Darth Racer]

Managed a new best today on a ok track.

The da was 320'

QUOTE]

Dang..320 ft? The best DA where I'm at has been ~ 2500 ft.

 

[rw95gt]

You probably know my situation from other posts. You're using the stock OEM differential? Mine lasted only 8 passes. For my application, it didn't hold up well. I'm using the MT 28/x10.5x15W slicks. I may have to go drag radials if I can't find a non-spool differential that'll hold up. My car is at full weight....about 4,000 lbs with me in the car.

Well to tell you the truth I amn running a tru trac in my car. My stock gears whined like crazy. Picked up a set of gears and during install found out one of my spider gears was very loose. To the point where it felt like I coould pull it out. So after some research and talking I decided to go with a tru trac to keep the stock feel but have something with out clutches. It works great. i know a few guys with heavy car running high nines with a tru trac with no issues at all. I just didn't think of it as a mod.

 

[rw95gt]

Great job Randall! You got that beast rolling out. You've done a great job with that car with what you have done to it.

Here you go:

THE EATON SUPERCHARGER SHELBY GT500 10 SECOND CLUB

THE UNPORTED EATON CREW:
1) Jerrytubbs1...............10.39 @ 131.01 w/ 1.49 (6spd/unported)
2) MD03SVT..................10.47 @ 131.85 w/ 1.473 (6spd/unported)
3) 500DRAGPAC.............10.65 @ 130.53 w/ 1.555 (6spd/unported)
4) FS MACH 1................10.70 @ 133.80 w/ 1.58 (6spd/unported)
5) le rafiot....................10.76 @ 131.69 w/ 1.57 (6spd/unported)
6) snake500..................10.808 @ 126.84 w/ 1.57 (6spd/unported)
7) 11ride4life................10.94 @ 127.71 w/ 1.595 (6spd/unported/Nitrous)

THE PORTED EATON CREW:
1) autoliberte................10.48 @ 133.66 w/ 1.555 (6spd/Steig Port)
2) VNMOUS1.................10.54 @ 129.55 w/ 1.495 (6spd/Posi Port)
3) serickson1................10.56 @ 131.88 w/ 1.47 (6spd/Steig Port)
4) rw95gt...................10.60 @ 133.20 w/ 1.52 (6spd/Home Port)
5) quadedaddy..............10.817 @ 130.45 w/ 1.599 (6spd/Posi Port)
6) zombeast.................10.86 @ 127.86 w/ 1.74 (6spd/Posi Port)

EATON SHELBY GT500 1/4 MILE 130 MPH CLUB (Non-nitrous)
1) serickson1.................135.35 (6spd/Steig Port)
2) FS MACH 1................133.80 (6spd/unported)
3) rw95gt...................133.20 (6spd/Home Port)
4) autoliberte................133.66 (6spd/Steig Port)
5) MD03SVT..................131.85 (6spd/unported)
6) le rafiot....................131.69 (6spd/unported)
7) Jerrytubbs1...............131.01 (6spd/unported)
7) quadedaddy..............130.74 (6spd/Posi Port)
9) 500DRAGPAC.............130.53 (6spd/unported)

Thanks! I tell ya this car sure is fun to mod and drive. I also ran a 10.84 at 126mph with only a upper and a tune and the slicks I did this the past spring. I have has the mod bug all summer and it might get a 75 shot here shortly but we will see.

 

[armycook1981]

dang man hauling ass for sure ... im trying to get in to the 10's still... i wounder if i should swap to slicks instead of the mt et streets in running..