New 1.5KB setup won’t start. Help!

[mean96svt]

First. My problem is no spark. Due to either fouling the plugs with gas or something being unplugged. Right now I have the plugs out to let the gas in cylinders and evaporate.

In this picture there are two connectors I haven’t reconnected. I believe they’re unused now, but could someone tell me what they went to? Or if this could be the no spark problem.

The ground connector on the stud next to coil pack wasn’t connected when we first tried to start? Would that cause a faulty ground and no spark which led to me flooding it? Thank you for anyone who responds!


Sent from my iPhone using the svtperformance.com mobile app

 

[mean96svt]

Worth adding I deleted some stuff like EGR SAI so I would have some connectors loose


Sent from my iPhone using the svtperformance.com mobile app

 

[mean96svt]

Bump


Sent from my iPhone using svtperformance.com

 

[rich5150]

It would be worth checking to see if you crankshaft position sensor is plugged in & working. If the harness doesn't receive a signal from this sensor, no spark will happen.

The round 4-pin sensor is for your upstream O2 sensors on either side of your exhaust/headers/manifolds.(when in closed loop) They are crucial to correct engine operation for fueling.