I changed up the intake and went to a front feed with an accufab 90 mm... question is what tps to use ?
Need tps info
- Thread starter Blackedout
- Start date
Can't you just use the stock? I think you just cut the 3 wires and extend them however long you need.
I tried the stock tps but it doesn’t sit right and has movement to it... thinking I need to use a Fox tps and figure out the wires to make it work... just looking to see what others had to do..
I run the same TB you have to use a fox tps then I just bought a 3 wire connector and repined it works fine. I used to have a picture of how you wire the fox tps to our wiring Harness let me see if I can find it.
Okay found it
87-93 tps —- Stock wiring harness
Orange goes to the brown/white
Green goes to the gray/white
Black goes to the gray/red
That’s how mine is wired and everything works as it should.
87-93 tps —- Stock wiring harness
Orange goes to the brown/white
Green goes to the gray/white
Black goes to the gray/red
That’s how mine is wired and everything works as it should.
That is exactly what I did and how I wired it... Thanks for the reply..
Users who are viewing this thread
