Need some help with the service manual

[FleeMan]

Does anyone have it or the torque specs for reassembling our engines? Not looking for the internal specs, just everything else on the outside. Ive looked everywhere for the torque values and all the links show up as errors. All the help is appreciated.

Leo

 

[Wings65288]

http://www.terminator-cobra.com/Mustang Service manual 2003.pdf

2003 Cobra torque specs & installation docs



P.1379 4V Cobra Engines (p.1382 has torque specs)

• Blower to I/C manifold p.1548
• Exhaust (RH) manifold p.1462 & 1570
• Exhaust (LH) manifold p.1466 & 1570
• Flywheel p.1483
• Head studs p.1559
• I/C manifold to block 89 in# p.1575
• Jack screws p.1556
• Main bearing caps p.1530
• Motor mount to block 40 ft#
• Oil cooler p.1468
• Oil pan p.1478 & 1566
• Oil pump screen/pickup tube p.1382 & (1383 for stud spacer)
• Rear main seal p.1583
• Timing chains installation p.1445 & 1560
• Timing cover p.1567
• Transmission (T56) installation & torque specs p.2926
• Valve cover (RH) bolts p.1570
• Valve cover (LH) bolts p.1570

 

[FleeMan]

I love you, I mean that in the most non homo way, a man can tell another man that he loves him.

@Wings65288

 

[Wings65288]

Lmao no worries. Just kind of some notes I kept when I built my engine. It probably needs a few things added but it's all in that manual if I left it out.

Page 4267 is where our wiring diagram starts, I've used that a lot also. For example I wanted to get a "key-on" power strip in my car to power gauges up and also power up line-lock. So I did an add-a-fuse instead of hacking up the "key-on" wires. Specifically I did the add-a-fuse to fuse #29 which is ABS and is no longer used on my car. The ABS is a "key-on" powered fuse. But it's pretty cool, tells you the exact color of every single wire in your car. It's unreal.