Need more psi now & a lot more later

Steeda1

New Member
Established Member
Joined
Jan 20, 2004
Messages
234
Location
Atlanta, GA
I know I want to get a Kenne Bell or Whipple later but don't have the $ right now. The ? I have is about the pulleys and chip. If I get the full billet flow set-up for the eaton will they work with the other blowers if I switch? Is the pulley size/psi ratio the same? And can the chip be retuned for the other blowers or do you have to use theirs?

Thanks for all of your guys help!
 

JWC

New Member
Established Member
Joined
Feb 11, 2003
Messages
829
Location
Powhatan, VA
I had the stock Eaton with 2.80 pulley and recently replaced the S/C with the Kenne Bell. The pulleys will not interchange. With the 2.80 I had a custom Diablo chip made, with the KB his kit came with a switch chip (two programs) on the chip. I thought it best to stay with his chip and not get the Diablo "re-tuned". I can say that the car now with the KB 15 lb pulley and KB chip is much faster, idles way better, and from a driveability standpoint is much improved over the stock Ford set up. The can runs great. In my opinion save your money and just get the KB complete set up.
 

Users who are viewing this thread



Top