Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
Engine/Tuning
Need help - Vacuum Leak PCV to Lower Intake
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="hotcobra03" data-source="post: 15883294" data-attributes="member: 53096"><p>hose in pic isn' ours..</p><p></p><p>I had issues on that hose under blower..</p><p></p><p>this hose will harden..vs blow hole.</p><p></p><p>I found the hose on nipper will not pull off and was never installed with a clamp..</p><p></p><p>on mine..that hose would spin on nipple,this was enough to set po171/172..</p><p></p><p>some have plugged that hole..</p><p></p><p>best to pull blower as 1 unit.</p><p></p><p>remove all vacuum hoses and electrical wires..</p><p></p><p>you have to lift front up on 45deg angle to get it out..</p><p></p><p>I would do new intake gasket also..cheap.</p><p></p><p>the intake bolts..they are tiny..I used 1/4 drive tools about pinky tight..</p><p></p><p>89 newton meters..</p><p></p><p>many threads on snapped bolt..</p><p></p><p>also it best to clean intercooler..you will need new orings for cross over tubes..</p></blockquote><p></p>
[QUOTE="hotcobra03, post: 15883294, member: 53096"] hose in pic isn' ours.. I had issues on that hose under blower.. this hose will harden..vs blow hole. I found the hose on nipper will not pull off and was never installed with a clamp.. on mine..that hose would spin on nipple,this was enough to set po171/172.. some have plugged that hole.. best to pull blower as 1 unit. remove all vacuum hoses and electrical wires.. you have to lift front up on 45deg angle to get it out.. I would do new intake gasket also..cheap. the intake bolts..they are tiny..I used 1/4 drive tools about pinky tight.. 89 newton meters.. many threads on snapped bolt.. also it best to clean intercooler..you will need new orings for cross over tubes.. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
Engine/Tuning
Need help - Vacuum Leak PCV to Lower Intake
Top