Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
Engine/Tuning
NEED HELP PLEASE!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="hotcobra03" data-source="post: 16746575" data-attributes="member: 53096"><p>I've had water in intake from cross over tubes,,</p><p></p><p>Didn't effect the car for running..but did blow white smoke and assume oil had some.</p><p></p><p>I've reused all my bolts when pulling blower and lower intake</p><p></p><p>When I pull Intercooler</p><p>I use nail polish for lock tight, still it's a good twist to break loose</p><p></p><p>Beware what lock tight strength,,</p><p></p><p>Red I think is the strongest.</p><p>Use that on a new nut and bolt,</p><p>Bet you need a vise and heat to break it loose. Jmo from doing this test .</p><p></p><p>Intercooler bolts are tiny and known to snap. I'm down to 8.</p><p></p><p>Tiny bead of silicone between cooler and blower..</p><p></p><p>If you did pull lower intake ..</p><p></p><p>Mis print on tourqe here.</p><p>89 inch pounds.</p><p>Or say pinky tight with 1/4 in drive tools.</p><p>Look at bolt, it's also tiny and long.</p><p></p><p>Replace o rings on cross over tubes</p><p></p><p>Manual does say to use new hardware</p><p></p><p>Your pic of Crack on Intercooler,,the other end has 2 tubes with 4 orings?</p></blockquote><p></p>
[QUOTE="hotcobra03, post: 16746575, member: 53096"] I've had water in intake from cross over tubes,, Didn't effect the car for running..but did blow white smoke and assume oil had some. I've reused all my bolts when pulling blower and lower intake When I pull Intercooler I use nail polish for lock tight, still it's a good twist to break loose Beware what lock tight strength,, Red I think is the strongest. Use that on a new nut and bolt, Bet you need a vise and heat to break it loose. Jmo from doing this test . Intercooler bolts are tiny and known to snap. I'm down to 8. Tiny bead of silicone between cooler and blower.. If you did pull lower intake .. Mis print on tourqe here. 89 inch pounds. Or say pinky tight with 1/4 in drive tools. Look at bolt, it's also tiny and long. Replace o rings on cross over tubes Manual does say to use new hardware Your pic of Crack on Intercooler,,the other end has 2 tubes with 4 orings? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
Engine/Tuning
NEED HELP PLEASE!
Top