29k obo. Located in Erie, PA.
Low mileage. Great mods, tons of power!
Full mod list below. Tried to sell on Facebook and had nothing but low balls and tire kickers. I'm in no hurry to sell but figured I'd list it now instead of waiting until spring.
The car is currently in storage rotting away waiting to be driven!
Had a head up refresh when I first bought the car. That's when 90% of these modifications were done.
Car runs great and pulls strong made 720~ to the wheels on e85 and 22lbs.
Full disclosure:
Has developed a small drip from the timing cover. Ill address this over the winter if I still own the car. Please PM me with any questions!
There is some spider webbing on the rear bumper(see picture)
Headers touch the kmember and will rattle from time time (see picture, adjustments to be made over winter)
Wiring in trunk from trunk mount kit not pretty, unsure how I wanted to make it show ready, another winter project.
There was a time ( before my owner ship) that there was a mileage discrepancy on the car fax, it's fixed now and has a clean car fax. I still have all the documentation that was needed for the correction.
As mentioned about I had the motor out of this car and put DC cast heads in. Everything was done at Horsepower by Hetrick in Jacksomville Florida. Heads, decked, valve job, springs, retainers, cams, studs. Degreed ..everything.
please PM me with any questions or concerns.
2004 Mystichrome Cobra
27K miles
2.9 Whipple Polished Snout
3.2 riechard racing Polished Upper
Accufab TB
JLT RAI carbon fiber dipped.
Stock MAF w/ MAFia
Metco Snub and idler pulleys
Metco Lower (2lb)
ARP crank stud
J2FAB 170AMP Alt
Moroso 7qt Oil pan
GT500 Windage tray
J2FAB 7gal Remount IC fluid tank. 1inch lines and flow mod
ON3 cross over delete 170* Thermostat
Wrinkle Black Powder coated Valve covers, timing cover, pulley bridge, Powered by SVT COP covers.
DC casting heads
Bullet Racing custom grind cams
PAC Springs and Retainers
Cloyes Adjustable Cam gears
Modified secondary tensioners
Melling Oil pump and billet oil pump gear
Cobra engineering Head cooling mod
ARP 2000 head studs
Kooks 1 3/4 3inch collect headers
Stage 8 Locking bolts
Kooks off road X pipe
Polished 3inch Bassani Cat back
Fore Hat Dual 465s
-10 Feed, -8 Return (PTFE)
Fore Regulator
F3i Controller With hobbs switch
ID1000
KB fuel rail pressure sensor disk
Mcleod RXT
Fidanza Aluminum Flywheel
26 Spline input shaft
Lethal Sleeve
UPR Quadrant
Steeda firewall adjuster
MGW Short Throw Shifter
PSR Tubular Kmember and arms
Energy Suspension Control Arm bushings
UPR Coil over kit
12-175 springs
Stock Blisten struts
MM CC plates
Steeda bumpsteer kit
Steeda X2 Ball joints
FTB full bushing kit
Milled Ford Racing Diff Cover (purple star light)
3.55 gear
Purple Star light Powder coated control arms
Tokio Dspec adjustable shocks
Eibach Springs
3.5 ARP extended studs
SLP Line Lock
Baer Drilled and slotted rotors
Hawk Pads
Powder coated calipers
Teflon coated S/S braided brake line
Wire tuck
UPR Battery relocation.
0 gauge power cable
SVE Series 1
305/35 Mickey Thompson S/S
Speed Of Sound Dual pod
AEM Wideband
Aeroforce Interceptor
99/01 Tails
Bullitt Side scoops
Flex Fuel badge
E-85 Gas Cap
TERMINATOR Door Sills
Purple Cobra Shift knob
HID Fogs
MRT Hood Struts
Fore hood vents
Sent from my SM-G950U using Tapatalk
Low mileage. Great mods, tons of power!
Full mod list below. Tried to sell on Facebook and had nothing but low balls and tire kickers. I'm in no hurry to sell but figured I'd list it now instead of waiting until spring.
The car is currently in storage rotting away waiting to be driven!
Had a head up refresh when I first bought the car. That's when 90% of these modifications were done.
Car runs great and pulls strong made 720~ to the wheels on e85 and 22lbs.
Full disclosure:
Has developed a small drip from the timing cover. Ill address this over the winter if I still own the car. Please PM me with any questions!
There is some spider webbing on the rear bumper(see picture)
Headers touch the kmember and will rattle from time time (see picture, adjustments to be made over winter)
Wiring in trunk from trunk mount kit not pretty, unsure how I wanted to make it show ready, another winter project.
There was a time ( before my owner ship) that there was a mileage discrepancy on the car fax, it's fixed now and has a clean car fax. I still have all the documentation that was needed for the correction.
As mentioned about I had the motor out of this car and put DC cast heads in. Everything was done at Horsepower by Hetrick in Jacksomville Florida. Heads, decked, valve job, springs, retainers, cams, studs. Degreed ..everything.
please PM me with any questions or concerns.
2004 Mystichrome Cobra
27K miles
2.9 Whipple Polished Snout
3.2 riechard racing Polished Upper
Accufab TB
JLT RAI carbon fiber dipped.
Stock MAF w/ MAFia
Metco Snub and idler pulleys
Metco Lower (2lb)
ARP crank stud
J2FAB 170AMP Alt
Moroso 7qt Oil pan
GT500 Windage tray
J2FAB 7gal Remount IC fluid tank. 1inch lines and flow mod
ON3 cross over delete 170* Thermostat
Wrinkle Black Powder coated Valve covers, timing cover, pulley bridge, Powered by SVT COP covers.
DC casting heads
Bullet Racing custom grind cams
PAC Springs and Retainers
Cloyes Adjustable Cam gears
Modified secondary tensioners
Melling Oil pump and billet oil pump gear
Cobra engineering Head cooling mod
ARP 2000 head studs
Kooks 1 3/4 3inch collect headers
Stage 8 Locking bolts
Kooks off road X pipe
Polished 3inch Bassani Cat back
Fore Hat Dual 465s
-10 Feed, -8 Return (PTFE)
Fore Regulator
F3i Controller With hobbs switch
ID1000
KB fuel rail pressure sensor disk
Mcleod RXT
Fidanza Aluminum Flywheel
26 Spline input shaft
Lethal Sleeve
UPR Quadrant
Steeda firewall adjuster
MGW Short Throw Shifter
PSR Tubular Kmember and arms
Energy Suspension Control Arm bushings
UPR Coil over kit
12-175 springs
Stock Blisten struts
MM CC plates
Steeda bumpsteer kit
Steeda X2 Ball joints
FTB full bushing kit
Milled Ford Racing Diff Cover (purple star light)
3.55 gear
Purple Star light Powder coated control arms
Tokio Dspec adjustable shocks
Eibach Springs
3.5 ARP extended studs
SLP Line Lock
Baer Drilled and slotted rotors
Hawk Pads
Powder coated calipers
Teflon coated S/S braided brake line
Wire tuck
UPR Battery relocation.
0 gauge power cable
SVE Series 1
305/35 Mickey Thompson S/S
Speed Of Sound Dual pod
AEM Wideband
Aeroforce Interceptor
99/01 Tails
Bullitt Side scoops
Flex Fuel badge
E-85 Gas Cap
TERMINATOR Door Sills
Purple Cobra Shift knob
HID Fogs
MRT Hood Struts
Fore hood vents
Sent from my SM-G950U using Tapatalk