Well i'm in full swing of my winter modding. I've got the car apart and have the following going in this winter:
-Pro Series Half Shafts(w/ new bearings going in the knuckles)
-FTBR rear Bumpsteer Kit(full)
-QA1 single Adjustable Shocks rear
-QA1 adjustable front struts
-UPR Driveshaft Safety Loop
-MSD 2-Step Launch Control
-BBK Long Tubes
-BBK O/R X-Pipe
-JLT High-Boost Intake(Swaping out Carbon Fiber JLT)
-80lb Deka Injectors
-Leathals 1200rwhp return fuel system
-Metco 2lb Lower(have 4lb but dont know if stock longblock can hold)
-Auroforce Interceptor Gauge W/ steering col pod and Wide Band Kit
Its a long list of mods for me and alot of money. But i'm so excited to see how she responds.
Current mods are
-2.9 Whipple with stock 3.5 upper and stock size Metco lower
-60's
-BAP
-SCT 3000 Big Air MAF
-typicle cooling mods(H/E, Res tanks, etc)
-BBK Catted X-Pipe
-Flowmaster Cat back 2.5inch
-Metco Idler set
-FTBR complete rear kit
-BF IRS Brace
-3.73 rear gears
-JLT CAI Carbon Fiber(As stated above)
-McCloud RXT Twin Disk
-MM Full Length Sub Frame Connectors
-I run 315 Micky Thompson DR out back
I'm probibly missing some things but I made 621/542 on this set up and on 100 oct. I'm hopeing that with me running E-85 and the mods i've purchased I'll be above 700hp and above 620tq.
What does everyone thing? any opinions or suggestions. What is some other people with the same mods getting?
-Pro Series Half Shafts(w/ new bearings going in the knuckles)
-FTBR rear Bumpsteer Kit(full)
-QA1 single Adjustable Shocks rear
-QA1 adjustable front struts
-UPR Driveshaft Safety Loop
-MSD 2-Step Launch Control
-BBK Long Tubes
-BBK O/R X-Pipe
-JLT High-Boost Intake(Swaping out Carbon Fiber JLT)
-80lb Deka Injectors
-Leathals 1200rwhp return fuel system
-Metco 2lb Lower(have 4lb but dont know if stock longblock can hold)
-Auroforce Interceptor Gauge W/ steering col pod and Wide Band Kit
Its a long list of mods for me and alot of money. But i'm so excited to see how she responds.
Current mods are
-2.9 Whipple with stock 3.5 upper and stock size Metco lower
-60's
-BAP
-SCT 3000 Big Air MAF
-typicle cooling mods(H/E, Res tanks, etc)
-BBK Catted X-Pipe
-Flowmaster Cat back 2.5inch
-Metco Idler set
-FTBR complete rear kit
-BF IRS Brace
-3.73 rear gears
-JLT CAI Carbon Fiber(As stated above)
-McCloud RXT Twin Disk
-MM Full Length Sub Frame Connectors
-I run 315 Micky Thompson DR out back
I'm probibly missing some things but I made 621/542 on this set up and on 100 oct. I'm hopeing that with me running E-85 and the mods i've purchased I'll be above 700hp and above 620tq.
What does everyone thing? any opinions or suggestions. What is some other people with the same mods getting?