My first terminator

CashMoneyKC

Active Member
Established Member
Joined
Jan 29, 2012
Messages
100
Location
Delaware
Hi all I’ve had 4 other mustangs and this is my 5th. My first terminator and vert. I’ve been a part of the group since 2012 from my 12 gt500. I picked up a 23k mile SB vert from NY. It’s a nice car I just hope I made the right decision there’s so many cobras and other cars out there. I want mine to be one of the nicest terminators so I’m going to try to get there. It’s close just needs a few things and finishing touches to complete the build. It’s a great starting point. It runs really strong (690whp) and no issues so I’m very happy with that. Does anyone have any advice on what else I should do or that all cobras should have done that I don’t have so I can get it taken care of? Thanks everyone.
2.6H Kenne Bell
Afco heat exchanger
SCT 2 custom tune, eibach pro springs, Light bar w/light, Lethal Performance Intercooler, UPR Short throw shifter, 60lb Injectors, Fuel rail pressure sensor, Borla x-pipe w/mac mufflers, IRS Brace, Subframe connectors, All poly bushings, 410 Gears, 18x10 wheels w/NITTO 305/35/18 555R's in rear, 18x9 NITTO INVO 265/35/18 in front, New battery
 

Attachments

  • 60C85B7A-6408-4FE1-B922-2901F28974BF.jpeg
    60C85B7A-6408-4FE1-B922-2901F28974BF.jpeg
    217.1 KB · Views: 195
  • A35E3E0B-1E14-4A9E-9AC4-D674B6D4E602.jpeg
    A35E3E0B-1E14-4A9E-9AC4-D674B6D4E602.jpeg
    779 KB · Views: 180

PC03GT

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
2,391
Location
delaware
Hi all I’ve had 4 other mustangs and this is my 5th. My first terminator and vert. I’ve been a part of the group since 2012 from my 12 gt500. I picked up a 23k mile SB vert from NY. It’s a nice car I just hope I made the right decision there’s so many cobras and other cars out there. I want mine to be one of the nicest terminators so I’m going to try to get there. It’s close just needs a few things and finishing touches to complete the build. It’s a great starting point. It runs really strong (690whp) and no issues so I’m very happy with that. Does anyone have any advice on what else I should do or that all cobras should have done that I don’t have so I can get it taken care of? Thanks everyone.
2.6H Kenne Bell
Afco heat exchanger
SCT 2 custom tune, eibach pro springs, Light bar w/light, Lethal Performance Intercooler, UPR Short throw shifter, 60lb Injectors, Fuel rail pressure sensor, Borla x-pipe w/mac mufflers, IRS Brace, Subframe connectors, All poly bushings, 410 Gears, 18x10 wheels w/NITTO 305/35/18 555R's in rear, 18x9 NITTO INVO 265/35/18 in front, New battery
Nice car, I'm sure it's a blast with that hp
 

COOL COBRA

Hell Yes!
Established Member
Joined
Nov 23, 2012
Messages
4,671
Location
Southern Mo.
I like it minus the black wheels. SB really pops with bright wheels, black ones dull out the overall look IMO.
Enjoy it! Car looks clean af.
IMG_0450.JPG

Example pic!
 

CashMoneyKC

Active Member
Established Member
Joined
Jan 29, 2012
Messages
100
Location
Delaware
I like it minus the black wheels. SB really pops with bright wheels, black ones dull out the overall look IMO.
Enjoy it! Car looks clean af.
View attachment 1703930
Example pic!
They were chrome but they were pitting so the previous owner plastidpped them . I don’t prefer them either. I’m getting ready to place my order for xt005r in gunmetal or sve series 2 chrome. I got back n forth. Think I’m leaning on cosmis though cuz gunmetal finish isn’t as popular. Thanks appreciate your feedback. Yours is I like it a lot and those wheels are different too.
 

COOL COBRA

Hell Yes!
Established Member
Joined
Nov 23, 2012
Messages
4,671
Location
Southern Mo.
Heck yes. That was a smart move by the previous owner to get the look & save the wheels with plastidip. All the look, low cost & saved a set of wheels.
Good luck on the new choice. Or, just rock these wheels for awhile while you get used to the car.
SB Verts are candy to my eyes!
 

COOL COBRA

Hell Yes!
Established Member
Joined
Nov 23, 2012
Messages
4,671
Location
Southern Mo.
Ok I just slowed down & re-read the mod list on this car. This thing has it going on!
Make sure the tune & fuel is good and hang on. Damn.
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Congratulations! That is one nicely modded Terminator. You definitely went for the throat. LOL.

I agree about the wheels advice. You could use those coated wheels for awhile before upgrading, or upgrade now with the wheel you really want and either save the black ones for future use or sell them.

Enjoy your "new" Cobra!
upload_2021-5-17_9-15-52.png
 

Bdubbs

u even lift bro?
Established Member
Premium Member
Joined
Jan 8, 2010
Messages
16,043
Location
MN
How do you guys find these old threads lol

Sent from my moto g power (2021) using Tapatalk
 

LS WUT

Well-Known Member
Established Member
Joined
Jun 26, 2013
Messages
3,983
Location
Sarasota, Florida
Bro.. I’ve been thinking the same exact thing haha. I love when old for sale threads come back up after years and get asked. Still for sale ?
 

Users who are viewing this thread



Top