MT ET Street Rs fitment

Marvin9075

Active Member
Established Member
Joined
Apr 4, 2016
Messages
237
Location
Texas
Hey guys so just recently found out I have a hole in my Hoosier drag radials on my cobra. Tires are 335/35s with rolled fenders and a small spacer for insurance. Had no issue with these far as fitment. Just recently bought a set of 315/55 MT”s street Rs from summit racing. Probably should have asked before purchasing but does anyone see any possible issues with the fitment? Thanks
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,683
Location
El Paso, TX
I’m on the hunt too.

I’m on HR sports but I have stock springs I could cut and install.

11” rim here which I’m guessing is the same for you since you had a 335 under there.

Who makes a 335/35? Could only find a 30.


Sent from my iPhone using svtperformance.com
 

Marvin9075

Active Member
Established Member
Joined
Apr 4, 2016
Messages
237
Location
Texas
I’m on the hunt too.

I’m on HR sports but I have stock springs I could cut and install.

11” rim here which I’m guessing is the same for you since you had a 335 under there.

Who makes a 335/35? Could only find a 30.


Sent from my iPhone using svtperformance.com
Hoosier makes the 335/35… I just ran a small spacer and rolled fenders and never had a problem
 

Marvin9075

Active Member
Established Member
Joined
Apr 4, 2016
Messages
237
Location
Texas
I’m rolled already.

What springs are you on?

And how did they perform?


Sent from my iPhone using the svtperformance.com mobile app
I am on H&R springs. Not sure what power level your at but I am a little over 800 wheel and they would spin second for me and hook 3rd… overall I liked them and they look great but I ended up going a different route and got the M&H drag masters 325/45s. I am on a 17x10.5 as well
 

Marvin9075

Active Member
Established Member
Joined
Apr 4, 2016
Messages
237
Location
Texas
Here’s what they look like from the rear with a small spacer
 

Attachments

  • 6FD381E6-453B-4B25-BC54-95AABA2655F1.jpeg
    6FD381E6-453B-4B25-BC54-95AABA2655F1.jpeg
    309.7 KB · Views: 60

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,683
Location
El Paso, TX
Looks good!

I’m on 18x11s @700wheel so tire size is a little limited compared to 17s.


Sent from my iPhone using svtperformance.com
 

Marvin9075

Active Member
Established Member
Joined
Apr 4, 2016
Messages
237
Location
Texas
Well ended up going with the M&H 325/45s 17s … they hook awesome only issue is having some rubbing on the fenders when hitting some large bumps do to the height … will be getting coil overs to fix the issue
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,683
Location
El Paso, TX
Well ended up going with the M&H 325/45s 17s … they hook awesome only issue is having some rubbing on the fenders when hitting some large bumps do to the height … will be getting coil overs to fix the issue

Ya that’s a pretty tall tire for sure!

Still haven’t decided what I want to do.


Sent from my iPhone using the svtperformance.com mobile app
 

Users who are viewing this thread



Top