Jason the Atlanta certified Ford master mechanic and expert electrical wizard of MMs installed my MDS Launch Master 2 Stage this weekend - see attached pictures. He did an outstanding job as usual - it looks like a OEM Ford install. The MSD LM is installed on the metal angle bracket used previously for the line lock install. The truely remarkable part of the install is that Jason did not use the MSD supplied wiring harness - a large bundle of wires and 12 FI connectors. He wired into the PCM wiring connector at the fire wall next to and underneath the MSD box. The result is a very clean and transparent installation. Thanks to Chris and the Shermanator for starting me down this road with the LM. They lead the way. Now there are two MMs with the LM.
Jason also installed the MM Concepts LEDS lights - very nice touch as well as the fog light/HB jumper install and new Infinity front door speakers - awesome sound. The Rolling Stones now sound like I am at one of their concerts. (Sorry, young'ns they were a popular rock group in the 60s and 70s.)
I hope to break into the 11.8s with the LM. I cannot add any more HP even though it would not be difficult, but the stock internals will not hold up to over 450 HP. So my solution is to improve my current 1.59 60' times to reduce my et. Every 0.1 sec reduced at launch improves the et by 0.2 seconds.
Glenn Ford
Jason also installed the MM Concepts LEDS lights - very nice touch as well as the fog light/HB jumper install and new Infinity front door speakers - awesome sound. The Rolling Stones now sound like I am at one of their concerts. (Sorry, young'ns they were a popular rock group in the 60s and 70s.)
I hope to break into the 11.8s with the LM. I cannot add any more HP even though it would not be difficult, but the stock internals will not hold up to over 450 HP. So my solution is to improve my current 1.59 60' times to reduce my et. Every 0.1 sec reduced at launch improves the et by 0.2 seconds.
Glenn Ford
Last edited:
