• Welcome to SVTPerformance!

MMR Stage 3 Turbo Cams - Idle Sound/video clip

Discussion in 'Engine/Tuning' started by Modular Racing, Jun 13, 2016.

  1. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    We have alot of people ask just how good do the MMR 5.0 Coyote cams sound at idle, we all know how well they perform, holding EVERY class record for the coyote engine, well, here's how they sound!



    These cams can be purchased below and are available in supercharged, N/A , Nitrous and Turbocharged versions along with NMRA renegade spec Requirements.

    http://www.modularmotorsportsracing...page=product_info&cPath=26_27&products_id=320

    http://www.modularmotorsportsracing...ge=product_info&cPath=4_30_35&products_id=321

    http://www.modularmotorsportsracing...ge=product_info&cPath=4_30_35&products_id=932
     
    Last edited: Jan 21, 2017
  2. Blazer707@TBR

    [email protected] Master Ford Tech Authorized Vendor

    Messages:
    4,313
    Joined:
    Aug 19, 2012
    Location:
    Bay Area
    That sounds awesome, great work as always mark.
     
  3. Dig Race

    Dig Race Member Established Member

    Messages:
    402
    Joined:
    Oct 5, 2015
    Location:
    Virginia
    What kind of gains over factory cams?
     
  4. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    This is a very open ended question because there are so many variables, in regards to this particular car it was never tested with stock cams, if comparing apples to apples these cams could and most likely would produce well over a 100HP increase on a car such as the one pictured. If you tell us about your combination we can tell you what you might expect.
     
  5. RAZRS EDGE

    RAZRS EDGE Stay Humble Established Member

    Messages:
    4,078
    Joined:
    Jun 10, 2004
    Location:
    OKC
    The want/need is STRONG.
     
  6. five.slow

    five.slow El Jefe Established Member

    Messages:
    3,422
    Joined:
    May 18, 2008
    Location:
    NORTH EASTON, MASS
    Guessing these are not a strait drop in... Or are they?


    Sent from my iPhone using Tapatalk
     
  7. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    The type of person that would choose our stage 3 would usually also be replacing springs and locking the VCT, it is however not required, if interested, send us your plans and goals and we can discuss what would be best!
     
  8. five.slow

    five.slow El Jefe Established Member

    Messages:
    3,422
    Joined:
    May 18, 2008
    Location:
    NORTH EASTON, MASS
    Stage 1 on a street car. I guess My question is more of is there machine work that is 100% required. Valve train stuff like springs, chains or cam gears are no biggie.


    Sent from my iPhone using Tapatalk
     
  9. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    No machine work at all, usually the supporting mods would be springs and MMR lockouts. MMR Secondary chains are always suggested as are the usual MMR oil pump gears and MMR Billet crankshaft gear.
     
  10. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    Thank you Sir!
     
  11. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    ttt
     
  12. corysmach1

    corysmach1 Active Member Established Member

    Messages:
    4,386
    Joined:
    Mar 22, 2004
    Location:
    Circleville, Ohio
    I need to lock my cams out.
     
  13. CobraBob

    CobraBob Authorized Vendor Premium Member Established Member

    Messages:
    88,916
    Joined:
    Nov 17, 2002
    Location:
    Cheshire, CT
    Now THAT sounds really nice. Close up it must make the hair on your arms stand up. Love it!
     
  14. blownby

    blownby Member Established Member

    Messages:
    317
    Joined:
    May 20, 2015
    Location:
    Perrysburg OH
    which cams for a street car seeing 4-5k miles a year.
    with typical Paxton novi 2200 at 10psi tq booster & BOSS 302 intake, Long Tubes & catless x pipe on 93 or E85 in near future. Stage 2?
    And what kind of gains and or where in the curve?
    Just at top? midrange or tq??

    OPG's in process so kicking cams around.

    Thanks,
     
  15. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    Yes, the MMR stage 2 for your combination would be perfect and add alot of power! Power gains will be from 3500+ and peak gains will be in the 65-75HP range.
     
  16. blownby

    blownby Member Established Member

    Messages:
    317
    Joined:
    May 20, 2015
    Location:
    Perrysburg OH
    I know springs are not needed, but is a new set beneficial?
    I see boss 302 springs for like $60 on your site?
     
  17. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
  18. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    ttt
     
  19. Modular Racing

    Modular Racing Authorized Vendor Authorized Vendor

    Messages:
    15,076
    Joined:
    Jun 28, 2004
    Location:
    877 MOD POWR
    ttt
     
  20. Aaron5.0

    Aaron5.0 New Member

    Messages:
    9
    Joined:
    Jul 13, 2014
    Location:
    indiana
    What cam do u recommend for a sleeved ,ported headed coyote with hellion twin with 6466 turbos. Car gets maybe 1,000 miles a year on street. The rest will on the track
     

Share This Page