MMR 2015 Mustang Ecoboost INTERCOOLER UPGRADE >>

Modular Racing

Authorized Vendor
Authorized Vendor
Joined
Jun 28, 2004
Messages
15,176
Location
877 MOD POWR
MMR 2015 Mustang Ecoboost Intercooler Upgrade. The MMR intercooler is 1" wider and 6" taller than factory! Decreases Pressure drop and air temperature. +19HP @ stock boost level!!! Direct bolt in! Retail @ $399

10628191_1558531447715027_8737644194505608706_n.jpg


10710841_1558531507715021_3098460398563993032_n.jpg


ecoboost%20intercooler%201.jpg
 
Last edited:

Voltwings

Well-Known Member
Established Member
Joined
Oct 1, 2013
Messages
2,739
Location
Houston
Any dynos or Boost air temp comparisons for those claims? Not meaning to sound like i doubt it, but show us the goods.
 

MikeLTDLX

Active Member
Established Member
Joined
Sep 19, 2004
Messages
2,174
Location
Mandeville, La
These cars definitely need some improvement in intercooling. Seeing IATs as high as the 180's on 1/4 mile passes and seeing negative timing also, which I am sure is related.
 

Voltwings

Well-Known Member
Established Member
Joined
Oct 1, 2013
Messages
2,739
Location
Houston
Judging by the "i am Groot" responses we have gotten so far, i am willing to bet the answer the that question is going to be "bump."
 

Modular Racing

Authorized Vendor
Authorized Vendor
Joined
Jun 28, 2004
Messages
15,176
Location
877 MOD POWR
Using a fluke thermocouple multimeter we observed temps reduced as much as 52 degrees compared to the stock intercooler (this was measured after 4 wide open runs back to back) the factory intercooler quickly heat soaked and never recovered, the MMR intercooler (which is 1 inch thicker and twice as tall) showed a minimum of 18 degree with a maximum of 52 degrees improvement with a ambient temp of 72 degrees (f)
 

Users who are viewing this thread



Top